Workshop Manual

12
3.4 DO NOT step on the brake pedal and move the vehicle during the disassembly/reassembly
operation.
3.5 DO NOT make the friction lining or friction disc stained with the oil/fluid which may reduce
the braking effeciency.
4. Removal Step
4.1 Remove the rear wheel (refer to the Removal Step for front wheel).
4.2 Remove two brake drum locating bolts with a cross screwdriver.
4.3 Swing the brake drum, and take off it.
4.4 Observe the structure of rear brake.
4.5 Remove the hand brake control cable with a caliper.
Bolts
Hand Brake
Control Cable