Workshop Manual

17
4.4 Remove the hand brake control cable at the other side
with the same method.
4.5 Remove two fixing bolts from the driver’s seat with a
16# socket wrench, and then take off the seat.
4. 6 Remove all fix screws from the auxiliary instrument
panel assy with a cross screwdriver, and then take off the
auxiliary instrument panel assy.
4.7 Remove two hand brake fixing bolts as shown in the
picture with a 10# socket wrench.
4.8 Loosen two control cable fixing screws with a 14# box
Wrench, and then take off the guide plate.
Guide
Plate