Workshop Manual

28
4.1.4 Unclench the rear helical spring with a screwdriver.
4.1.5 Forcefully swing leftwards and rightwards the rear
bumper block by hand and then take off the block.
4.2. Removal of lateral support bar assy
4.2.1 Remove the connecting bolts from the left side of body
and lateral support bar with a 15# sleeve.
Torque: 100±10N.m
4.2.2 Remove the connecting bolts from the right side of body
and lateral support bar with a 15# sleeve, and then take off the
lateral support bar assy.
Torque: 100±10N.m
4.3. Removal of rear trailing arm assy
4.3.1 Remove the connecting bolts from the rear of rear axle
and trailing arm assy with a 13# sleeve.
Torque: 100±10N.m