Workshop Manual

Chapter Nine Disassembly of Engine Assembly
I. Disassembly Procedure
1. Disassembly of engine wire harness
1.1 Pull out the connecting plug of engine wire harness.
1.2 Use a 10# sleeve to loosen the fixing bolt of engine
ground.
2. Use a 10# sleeve to remove the fixing bolt and bearer
of battery.
Note:
Please use regular equipment, especially for such
equipment as crane etc., so as to avoid occurrence of accident.
Before any disassembly job, disassemble cathode of battery
first, so as to protect safety of electricity consumption equipment.
When disassembling engine suspension, pay attention to
disassembly order, so as to avoid occurrence of accident.