Service manual

Chery S18D Service Manual
7.2. Pull off the harness connector and remove
the license lamp.
Ⅷ.Installation & Adjustment of Headlamp
8.1. Installation Procedures for the Headlamp
The installation procedures of headlamp are
reverse to those for removal.
8.2. Function of headlamp
8.2.1. Front view
As shown in right figure:
1 Low beam lamp
2 Turn lamp
3 High beam lamp and position lamp
8.2.2. Back view
1 High beam lamp up & down adjusting nut
2 High and low beam lamp and position lamp
rear cover
3 Turn lamp bulb holder
4 Low beam left & right adjusting nut
5 Low beam lamp rear cover
6 Low beam lamp up & down adjusting nut
8.3. Adjustment of Headlamp
8.3.1. Pay attention to law and regulations and verify the following items before adjustment:
1). The tire air pressure should comply with the related standard;
2). Vehicle is unloaded (except for spare tire and equipping tools, and include driver’s weight for
sedan);
3). The vehicle should be parked on level and smooth road or field;
4). The matched mirror surface of the headlamp should be fresh of dirt;
5). The power supply should work normally and the bulb should be properly installed.
8.3.2. Insert a hexagon wrench into corresponding adjusting hole to adjust the lamp.
33