User`s manual

Driving
42
P = Parking
R = Reverse Gear
N = Neutral Gear
D = Drive Gear
+ = Upshift
- = Downshift
P = Parking
Under such position, the output shaft of
the transmission is locked and drive
wheel can’t rotate.
The gear selector lever can move out
from such parking position only when
the brake pedal is stepped down and
the ignition switch key is at ON
position.
SHIFT LOCK = Gearshift
Lock
When to move the gearshift lever
without the stepping down of the brake
pedal, please push down SHIFT LOCK
(gearshift lock) key.
R = Reverse Gear
This position must be shifted to during
backup.
When need to use gear R,
please shift gear R position
after the vehicle is
completely still; otherwise it may
damage the transmission. Chery
Automobile Co., Ltd. will not be
liable for the warranty of such
malfunctions.
N = Neutral Gear
Such position can be shifted to only
when at engine start or idle speed. At
such time, no power will be transmitted
to the drive wheel.
D = Drive
The gear selector lever position during
automatic driving.
Manual Gearshift Mode
+ = Upshift - = Downshift
The gear selector lever shift
position under manual drive
mode.
Operation Notices:
1. The engine can start only when the
transmission is at “P” or “N” position.
2. The manual gearshift mode can only
be shifted to when the gear selector
lever is at position D.
3. When to shift to manual gearshift
mode, please shift the gearshift lever
rightward to position; It will be
automatic gearshift mode if the
gearshift lever is always at left.
4. Under the manual gearshift mode,
shift the gear selector lever towards +
mark to upshift the transmission to the
next high gear; shift the gear selector
lever towards – mark to downshift the
transmission to the next low gear.
Make sure to pull up the
handbrake handle before
leaving the vehicle.
This position can be shifted to
only when the vehicle is
completely still.