Owner`s manual

4. Press the lower knob.“000” will
appear on the display.
digit of your code appears. Release the
button.
6. Press SEEK 4 or and hold until the
fifth and sixth digits of your code
appear. Release the button.
7. Press the lower knob. “SEC” will
appear and the unit will work. If
“LOC” shows, the numbers did not
match and the
unit is still locked.
5. Press SCAN and hold until the fourth
How to Change Your Security Code
You can change your security code by
following these steps:
1. Using your old code, follow the
directions given under “Shutting Off
the Theft-Deterrent Feature.’’
2. Repeat directions of “Setting Your
Security Code” with your new
security code.
Understanding Radio Reception
FM Stereo
FM stereo will give you the best sound.
But FM signals will reach only about
10 to 40 miles (16 to 65 km). And, tall
buildings or hills can interfere with
FM signals, causing the sound to come
and go.
AM
The range for most AM stations is greater
than for FM, especially at night. The
longer range, however, can cause stations
to interfere with each other. AM can pick
up noise from things like storms and
power lines. Try reducing the treble to
reduce this noise
if you ever get it.
I
127---