Owner`s manual

Service & Appearance Care
if outside temperatures are 50°F (10°C)
or more. If it's colder than 50°F (lO°C),
you may have to idle the engine longer.
A hot check must follow when fluid is
added during a cold check.
To check the fluid hot or cold:
0 Park your vehicle on a level place.
Place the shift lever in P (Park) with
0 With your foot on the brake pedal,
the parking brake applied.
move
the shift lever through each gear
range, pausing for about
three seconds
in each range. Then, position the shift
lever in
P (Park).
minutes or more.
0 Let the engine run at idle for three
234
A
3.4L L32 (Code S)
Then, without shutting off the engine,
follow these steps:
1. Pull out the dipstick and wipe it with a
clean rag or paper towel.
3
2
5.7L LTl (Code P)
!. Push it back in all the way, wait three
seconds and then pull it back
out
again.