Owner`s manual

Service & Appearance Care
~1 NOTICE:
Ill Then, follow these steps:
100 mucn or too mtIe nula can
damage your transmission.
Too
much can mean that some of the
fluid could come out and fall on hn
engine parts, starting a fire. Be s
to get an accurate reading if you
check your transmission
fluid
1. Remove the filler plug.
2. Check that the lubricant level is up to
the bottom of the filler plug hole.
11 3. If the fluid level is good, install the
plug and be sure
it is fully seated. If
the fluid level is low, add more fluid
as described in the next steps.
II
Check the fluid level only when your
engine is
off, the vehicle is parked on a
level place and the transmission is cool
enough for you to rest your fingers on the
transmission case.
How to Add Fluid:
Here’s how to add fluid. Refer to the
Maintenance Schedule to determine what
kind
of fluid to use. See “Recommended
Fluids and Lubricants”
in the Index.
1. Remove the filler plug.
2. Add fluid at the filler plug hole. Add
only enough fluid to bring the fluid
level
up to the bottom of the filler
plug hole.
3. Install the filler plug. Be sure the plug
is fully seated.
... 236