Owner`s manual

Service Station Information
L
h
U
4. Pull the assembly off from the outside.
5. To remove a socket with a tab,
press the tab and turn the socket
counterclockwise.
To remove a
socket without a tab, turn the socket
counterclockwise.
6. To remove the bulb, push in and turn
7. Reverse the steps with a new bulb.
it counterclockwise, then pull it out.
Rear Sidemarker
To replace a rear sidemarker bulb:
1, Remove the screw from the
sidemarker assembly.
2. To pull out the bulb housing, tilt the
housing
to remove the tabbed end.
3. Turn counterclockwise and pull out
4. Pull out the bulb.
5. Reverse the steps with a new bulb.
the socket and the bulb.