Owner`s manual

4. Fill with the proper mix. Add coolant
until you see a steady stream of
coolant coming from the bleed valves.
5. Close the bleed valves.
6. Continue to fill the radiator up to the
7. Rinse or wipe the spilled coolant from
base of the filler neck.
the engine and compartment.
3.
Start the engine and allow it to run in
idle for approximately four minutes.
By this time, the coolant level inside
the radiator
will be lower. Add more
of the proper
mix through the filler
neck
until the level reaches the base of
the filler neck.
165 ...