Owner`s manual

When this light is on, the gear shift lever
will let you shift from “1” (First) gear to
“4”(Fourth) gears only. Once you are in
“4” (Fourth) gear, you can press the
clutch again and shift into another gear.
Follow the shift speeds in this chart when
the
“SKIP SHIFT” light is on.
Computer Aided Manual Transmission
Shift Speeds:
1st to 4th . . . 15 mph (24 km/h)
4th to 5th . . 25 mph (40 km/h)*
5th to 6th . . 40 mph (64 km/h)**
Each time you come to a stop, the
engine’s Electronic Control Module
(ECM) determines when to activate the
shift speeds (MANUAL TRANSMISSION)
This chart shows when to shift to the next higher gear for best fuel economy.
MANUAL TRANSMISSION RECOMMENDED SHIFT SPEEDS, IN MPH (km/h)
Acceleration Shift Speed
Engine
1 to 2 I 2to3 I 3to4 I 4t05 I 5to6
5.7L LT1
15
25
40 45
50
(Code P) (24)
(40) (64)
(72)
(80)
If your speed drops below 20 mph (30 km/h), or if the engine is not running smoothly,
you should downshift to the next lower gear.
You may have to downshift two or more
gears
to keep the engine running smoothly or for good performance.
“SKIP SHIFT” upshift system. Use “2”
(Second) gear only when you accelerate
very quickly from a stop.
You can then
follow the full gear shift pattern.
“30 mph (48 km/h) when accelerating to
highway speeds.
““45 mph (72 km/h) when accelerating
to highway speeds.
65 ...