Owner`s manual

the left and
remove it from
the socket.
5. Put the new bulb in the socket, gently press in on the bulb and turn it to
6. Put the socket back into the light assembly and turn it socket to the
7. Put the parking/turn signal light assembly back into the vehicle and
the right until it is tight.
right until it locks.
tighten the screws.
Side Marker Lights with Sealed Beam
and Composite Headlights
1. Remove the
screws and pull
out the
parking/tum
signal light
assembly.
2. Reach through
the opening and
turn the side
marker bulb
socket to the left
and remove it.
6-53
-