994 CAVALIER O W E R ' S MANUAL
O C h e v r o l e t Cavalier I I994 Owner’s Manual Table of Contents Part I Seats & Restraint Systems.................. 1.,1 Part 2 Features & Controls............................. Part 3 Comfort Controls& Audio Systems.... 91 Part 4 Your Driving and the Road Part 5 Part 6 Part 7 8 Part 41 ................ 107 Problems on the Road....................... 127 Maintenance Schedule...................... 203 Customer Assistance Information....
Important Notes About this Manual Please keepthis manual in your Chevrolet, so it will be there if you ever need it when you’re on theroad. If you sell the vehicle, please leavethis manual in it so the new owner can useit. This manual includesthe latest information at the time it was printed. We reserve the right to make changes inthe product after that time without further notice.
The Heritage of Chevrolet ..................... , , Fii I II The dynamic William C. ‘%illy”Durant shifted gearsfrom making carriages to making cars, forming half of the team that gave birth to Chevrolet.
The 1957 Chevy started a romance with the American public-and was poweredby an I available &el-injected V8. I I I I I I '60s automotive excitement included Chevrolet landmarks like the Corvette Sting Ray, thesporty Camaro, and powerplants like the legendary 327 V8. Your new Chevrolet continuesa tradition of quality and value.
Using Your 7994 Chevrolet Owner’s Manual Part 1: Seats & Restraint Systems This part tells you howto use your seats and safety belts properly. Many people readtheir owner’s manual from beginning to end when Part 2 Features & Controls they first receive their new vehicle. This This part explains howto startand will help youlearn about the operate your Chevrolet. features and controls for your vehicle.
i I Part 8: Customer Assistance Information This part includes important information about reporting safety defects and gives you detailsabout the “Roadside Assistance” program.You will also findcustomer satisfaction phone numbers (including customer satisfaction numbers forthe hearing and speech impaired)as well as the mediation/ arbitration procedure. We’ve also included ordering information for service publicationsin this part.
How to Use this Manual In thegray caution area, we tell you what the hazard is. Then we tell you what to do to help avoid or reduce the hazard. Please read these cautions. If you don’t, you or others could be hurt. You will also find a circle with a slash through it in this book. This safety symbol means: Don’t Don’t do this Don’t let this happen Vehicle Damage Warnings Also, in this book you will find these notices: NOTICE: These mean there is something that could damage your vehicle.
Vehicle Symbols These are some of the symbols you will find on your vehicle.
How to Use this Manual These symbols are on some of your controls: These symbols are used on warning and indicator lights: Here are some other symbols youmay see: Windshield Wipers Engine Coolant Temperature Fuse Windshield Washer Trunk Release Battery Charging System Lighter Windshield Defroster Fuel Rear WindowDefogger p3 Horn Engine Oil Pressure Speaker Ventilating Fan Brake Hood Release Anti-Lock Brakes
Part I Seats & Restraint Systems H e r e YOU’II find information about the seatsin your Chevrolet and how . You to use your safety belts properly can also learn about some things you shouldnot do with safetybelts. Seats and Seat Controls ............................................................................................ Safety Belts................................................................................................................ How to Wear Safety Belts Properly ...................
Seats & Restraint Systems Stas and Stat Controls This section tellsyou about the seatshow to adjust thern-and &a about reclining seatbacks and head restraints. Manual Front Seat ikclining Front Seafbsck 3'0 adjust the seatback, lift the lever or]. tlhe outer side uf the sed mdmove the Sieathack to where you want it. Release. tlhe lever to lo& the seatback. Pull up 0n the kmr and the seat will go to an Upright position. B;ut don't have a seatback reclinedit Y'Dur vehicle ismoving.
I 1 Head Restraints Head restraints are fixed on some vehicles and adjustable on others. Slide an adjustable head restraint up or down so that the topof the restraint is closest to the topof your ears. This position reduces the chance of a neck injuryin acrash. On some models,the head restraints tilt forward and rearward also.
I:s & F lraint Systems C - - Manual 4-WayAdjustWe Drker’s Seat (opnouj Fmni Seatback LaRches There are two levers at the front of the seat. The left lever adjusts the seat forward arrd back. The right lever adjusts the angle of the frontof the seat. To Adjust the Seat%Forward and Rearward Movement: Lift the left leverup and adjust the sed forward or back.Then release the lever and try to move the seat to be certain that it is locked inplace.
Easy-Enfry Seaf (RS 2-DOOR AND 2-24 MODELS) The right front seat of your vehicle makes it easy to get in and out of the rear seat. When you push down on therear latch and tilt the right front seatback fully forward,the whole seat will slide forward. After someone gets into the rear seat area, move the right front seatback to its original position.Then move the seat rearward until it locks. To getout, again tilt the seatback fully forward.
Seats & Restraint Systems To Lower the Split Folding Rear Seat: 2. Push down on the filler panel and the seatback so they lock into a level 1. There is a release leveron the side of position. each seat. Pull the release lever forward and pull the seatback forward and down. 1 ... 16 To Raise theSplit Folding Rear Seat: 1. Push downon the edge of the seatback and pull up the filler panel. 2. Lift the seatback until it loclts in place. Push back and forth on the Seatback to be sure it is locked in place.
Safety Belts: They’re For Everyone n This part of the manual tells you howto use safety belts properly.It also tells you some things you should not do with safety belts. This figure lightsup as a reminder to buckle up. (See Safety Belt Warning Light in the Index.) In many states and Canadian provinces, the law says to wear safety belts. Here’s why: They work. You never know if you’ll bein a crash. If you do have a crash, you don’t know if it will bea bad one.
Seats & Restraint Systems Why Safety Belts Work When you ride inor on anything, you go as fast as it goes. 1. For example, if the bike is going 10 mph (16 km/h). so is the child. 4. Put someone on it. ' 8 . 18 2. When the bike hits the block, it stops. But thechild keeps going! 3. Take the simplest vehicle. Suppose it's just a seat on wheels. 5. Get itup to speed. Then stop the 6. The person keeps goinguntil stopped vehicle. The rider doesn't stop. by something.
HereAre Questions Many People Ask About Safety Belts - the Answers ... 7. or the instrument panel : 8. or the safety belts! systems only- so they workwith With safety belts,. you slow down as the & ~ ‘m&t&sQp, v6Kicle d & ~ i ; ~ & ! h&. safety belts,not instead of them. Every air bag system ever offered for You stop over more distance, and your sale has required the use of safety strongest bones take theforces. That’s belts. Evenif you’re in a vehicle that why safety belts makesuch good sense.
~~ Seats & Restraint Systc First, you’ll want to know which restraint systems your vehicle has. We’ll start with the driver position. Vehicles First SoldIn Canada Safety Belt Warninglight When the key is turned to Run or Start, a chimewill come on for about eight seconds to remind peopleto fasten their safety belts, unless the driver’s safety belt is already buckled. The safety belt light will also comeon and stay on for 20 seconds, then itwill flashfor an additional 55 seconds.
Driver Position This section describes the driver’s restraint system. Automatic Lap-Shoulder Belt This safety beltis called “automatic” because you don’t have to buckle up when you getinto your vehicle. And you don’t have to unbuckle when you get out. Just get into your vehicle. Then close and lock the door. Adjust the seat (to see how, see Seats in the Index) so you can situp straight. 21 ...
- Seats & Restraint Systems I The safety belt locltsif there’s a sudden stop or a crash. It’s possiblethat anautomatic belt could keep you from fully opening a door. That can happenif the door was slammed shut very hard. Just close the door allthe way, then slowly open it. If that doesn’t fix it, then your Chevrolet needs service. We hope you’ll always keep your The lap belt should be wornas low on automatic belt buckled. However,you :he hips as possible.
'1 To reattach the automaticbelt: 1. Close and lock the door. 2. Adjust the seat (to see how, see Seats in theIndex) so you can sit up straight. 3. Pick up the latch plate and pull the belt across you. Don't let it get twisted. 1. Push the latch plate into thebuckle until it cliclts. Pullup on the latch plate to make sure it is secure. QI: What's wrong with this? A,:The shoulder belt is too loose. It won't give nearly as much protectior this way.
Q: What’s wrong with this? A: The shoulder belt is worn under the ani. It should be worn over the shoulder at all times: ... 24 . .. ,... Q: What’s wrong with this? A: The beltis twisted acrossthe body. Safety Belt Use During Prepncy Safety belts work for everyone, including pregnant women. Like all occupants, they are more likelyto be seriously injured if they don’twear safety belts.
Seats & Restraint Systems Pear Seat Outside Passenger Dositions Lap-Shoulder Belt The positions nextto thewindows have ap-shoulder belts. Here's howto wear me properly. 1. Pick up the latch plate and pull the belt across you. Don't let it get twisted. 2.Push the latch plate into the buckle until it clicks. If the belt stops beforeit reaches the buckle, tiltthe latch plate and keep pulling until you can buckle it. Pull up on the latch plate to make sure it is secure.
To make the lap part tight, pull down on the buckle end of the belt as you pull up on the shoulder part. The lap part of the belt should be worn To unlatch the belt, just push the low and snugon thehips, just touching button on the buckle. the thighs. In a crash, this applies force to thestrong pelvic bones. And you’dbe Rear Safety Belt Comfort Guides less likelyto slide under the lap belt. If for Children and Small Adults you slid under it, thebelt would apply force at your abdomen.
Seats & Restraint Systems There is one guide for each outside passenger positionin the rear seat. You will find them tucked in betweenthe seatback and the interior body, about half-way downthe edge of the seatback. Here is how youshould install the comfort guideon the shoulder belts: 1. Pull the elastic cordout from between the edge of the seatback and the interior body to remove the guide from its storage clip. . I 28 2. Slide the guide under and past the belt. The elastic cord must beunder the belt.
r 4. Buckle the belt around thechild, and make sure that both the lap belt and the shoulder belt are secured properly. Makesure that theshoulder belt crosses the shoulder. See Safety Belts, Rear Seat Passengers in the i Index. To remove and store thecomfort guides, just perform these steps in reverse order. Squeeze the belt edges together so that you can take them out from the guides. Pull the guide upward to expose its storage clip, and then slide the guide onto theclip.
Seats & Restraint Systems Smaller Childrenand Babies To make the belt shorter, pull its free end as shown until the belt issnug. Buckle, positionand release it thesame way as the lap part of a lap-shoulder belt. If the belt isn’t long enough, see Safety Belt Extender at the end of this section. Make sure the release button on the buckle is positioned so you would be able to unbuckle the safety belt quickly if you ever hadto.
IChild Restraints Be sure to follow the instructions for the restraint. You may find these instructions on the restraint itself or in a booklet, or both.These restraints use the belt systemin your vehicle,but the child also has to be secured within the restraint to help reduce the chance of personal injury. The instructions that come with the infant or child restraint will show you howto do that. Accident statistics show that children are safer if they are restrained in the rear rather than thefront seat.
Seats & Restraint Systems Top Strap If your child restraint has a top strap, it should be anchored. If you need to have an anchor installed, you can ask your Chevrolet dealer to put it in for you.If you want to install an anchor yourself, your dealer can tell you how to doit. For cars first sold in Canada, child restraints with a top strapmust be anchored according to Canadian Law.
I I 1 5. To tighten the belt, pull up on the shoulderbeltwhileyou push down on the child restraint. 6. Push and pull the child restraint in Securing a Child Restraint the in different directionsto be sure it is Center Rear Seat Position secure. When you securea child restraint in a To remove the child restraint, just center seating position, you’llbe using unbuckle the vehicle’s safety beltand the lap belt. let it go back allthe way.
Seats & Restraint Systems 1, Make the belt as long as possible by tilting the latch plate and pulling it along the belt. 2. Put the restraint on theseat. Follow the instructions for the child restraint. 3. Secure the child in the child restraint as the instructions say. 34 different dtlrectionsto be sure it is secure. If the child restraint isn’t secure, turn thelatch plate over and buckle it again. Then seeif it is secure.
Securing a Child Restraint inthe Right Front Seat To use a child restraint here, you will need a special infant/childseat attaching belt and thehardware that goes with it. See the earlier section about the top strap if the child restraint has one. Your dealer can get this and install the hardware for you. It's free. The special belt is GM Part Number 12340286.
Seats & Restraint Systems I Once the special hardware is installed, 2. Snap one hook of the infant/child seat attaching belt near the floor at please follow the instructions with it door side of the seat. the and these steps: 1. Unbuckle the automatic lap-shoulder belt by pushing the button on the buckle. It will stay on thedoor, ready to be rebuckledfor use by adults or older children. 3. Put the belt's special latch plate into the vehicle's safety belt buckle.
4. You can makethe belt longer by tilting the buckle and pulling it along the belt. 5. Put the restrainton the seat.Follow the instructionsfor the child restraint. 6. Secure the child in the child restraint as the instructionssay. 7. Run the belt through or around the child restraint. The child restraint instructions will show you how. 8. Put thehook on the free endthrough the slot in the latch plate. 9. To make it tight, pull the belt while you push downon the child restraint.
2. Push the spring on the hook near the door and remove the special belt. Put the belt awayin a safe place in your vehicle, so it won’t flyaround in a crash and injure someone. Remember to reattach the automatic belt again, oncethe child restraint is removed. Be sure it isn’t twisted. Larger Children Children who have outgrown child restraints should wearthe vehicle’s safety belts.
Q: What if ,ab .child . .: ..:is w earing ais lapshouldetbelt, tjdi the s& .$, I -, ’ small that the shoulder beltis very close to the child’s face or neck? A: Move the child toward the center of the vehicle, but be sure that the shoulder belt still is on thechild’s shoulder, so that in a crash the child’s upper bodywould have the restraint thatbelts provide.
Seats & Restraint Systems 4 Safety BeltEaeder If the vehicle’s safety belt will fasten around you, you should useit. The automatic lap-shoulder belt has plenty of extra length builtin, so it will fasten around almost all people. But if a safety belt isn’t long enough to an fasten, your dealer will order you extender. It’s free. When you go to in order it, take the heaviest coat you will wear, so the extender will be long enough for you.
........;\? Keys............................................................................................................................ 42 Locks .......................................................................................................................... 43 Glove .................................................................................................................. 47 H e r e you can learn about the . . Box .......................................................................
Features & Controls ?heignition keysare for the ignition IdY. :he door keys are for the doors and all Ither locks. Vhen a new Chevroletis delivered, the lealer removes the plugs from the keys, nd gives them to the first owner. Iach plug has a code on it thattells our dealer or a qualified locksmith .owto maleextra keys. Keepthe plugs I a safe place.If you lose your keys, ou'll be able to have newones made asily using these plugs.
NOTICE: Your Chevrolet hasa number of new features that can help preventtheft. But you can have a lot of trouble getting into your vehicleif you ever lock your keys inside. You may even have to damage your vehicleto get in. So be sure you haveextra keys. ~ rhere areseveral waysto lock and d o c k your vehicle. From the Outside: Use your door ley. From the Inside: To lock the door, pullthe sliding lockin$ lever back. To unlock the door, push the sliding locking lever forward.
Automatic Door Locks Power Door Locks You can lock or unlock all doors of your vehicle fromthe driver or passenger door lockswitch. On 4-door models,the switch on each rear door works onlythat door’s lock.It won’t lock (or unlock) all of the doors-that’s a safety feature. w w w 44 Just close yourdoors and turn on the ignition. If you have an automatic transaxle, all of the doors will lock when you move your shift lever out of P (Park) or N (Neutral).
Features & Controls Remote Trunk Release (OPTION) Pull upwardon the remote release handle, located on thefloor near the left side of the driver’s seat, to release the trunk lid. Lockout Feature: The remote trunk release is equipped with a lockout feature to help prevent unauthorized entry into the trunkwhen the vehicle is unattended. The switch is located on the inside of the trunklid, mounted to the trunklid latch. To turn thelockout on, slide the switch all the way to the right until it clicks.
Remote Liltgate Release(WAGON) Glove Box Press the yellow liftgate releasebutton located in the glove box to release the liftgate. The automatic transaxle must be in P (Park) or N (Neutral) for the liftgate lock releaseto work. With amanual transaxle, the parking brakemust be set. To open, pinch the handle. neft Vehicle theft is big business, especially in some cities.Although your Chevrolet has anumber of theft deterrent features, we know that nothing we put on it can make it impossible to steal.
Illuminated EntryExit System When you liftthe handle of either front door, the lights inside your vehicle will go on. (On thewagon, the rear compartment light willnot go on when the doors are opened.) These lights will go off after about 40 seconds, orwhen the ignition isturned on. For two minutes after you remove the key fromthe ignition, the lights inside Trunk Lock your vehicle will stayon for about 15 To unlockthe trunkfrom the outside, seconds to provide an illuminated exit.
Features & Controls Key in the rgnition Parking at Night Parking Lots If you walk away from your vehiclewith the keys inside, it’s an easy target for joy riders or professional thieves- so don’t do it. When youpark your Chevroletand open the driver’s door, you’ll hear a chime reminding youto remove your ley from the ignition and take it with you. Always do this. Your steering wheel will be locked,and so will your ignition. If you havean automatic transaxle, taking your key out also locks your transaxle.
New Khicle ‘Break-in" NOTICE: Convenience Net (OPTION) Trunk Cargo Anchors(OPTION) Your vehicle may havea convenience net. You’ll see itjust inside the back wall of the trunk. Putsmall loads, like grocery bags,behind the net. It can help keep them from falling overduring sharp turnsor quickstarts and stops. Unclip a corner of the convenience net to fit larger objectsbehind the net, then reclip it to secure them in place. The net isn’t for larger, heavier loads.
Features & Controls RUN A warning chime w ill sound if you open the driver’s door whenthe ignition is off and the key isin the ignition. Run: An “on” position to which the switch returns .after youstart your engine and release’the syitch.The switch staysin the Run position when the engine is running. But even when the engine isnot running, you can use Run to operate your electrical power accessories, andto display some histrument panel WarningJights.
Starting YourEngine Key Release Button (MANUAL TRANSAXLE) Follow the proper steps to start the engine. Automatic Transaxle: Move your shift leverto P (Park) orN (Neutral). Your enginewon’t start in any other position - that’s a safety feature. To restart when you’re already moving, use N (Neutral) only. NOTICE: The ignitionkey cannot be removed Don’t try to shift to P (Park) if your from the ignition unlessthe key release Chevrolet is moving.If you do, you button is used. could damagethe transaxle.
Features & Controls NOTICE: Your engineis designed to work with the electronics in your vehicle. If you add electricalparts or accessories, you could change the way the fuel injection system operates. Before adding electrical equipment, check with your dealer. If you don’t, your engine might not perform properly.If you ever haveto I have your vehicle towed, see the part (OPTION) of this manual that tells how to do it without damaging your vehicle.
How long shouldyou keep the coolant heater plugged in? The answer depends on theweather, the kind of oil you have, and some other things. Instead of trying to list everything here, we ask that you contact a Chevrolet dealer in the areawhere you’ll be parking your vehicle. The dealer can give youthe best advice forthat particular area. .Automatic Transaxle Your automatic transaxle has a shift lever locatedon theconsole between the seats. There are several different positions for your shift lever.
Features & Controls Ensure the shift lever is fully in P (Park) range before starting the engine. Your Chevrolethas a brake-transaxle shift interlock. You have to fully apply your regular brakesbefore you can shift from P (Park) when the ignition ley is in the Run position. If you cannot shift out of P (Park), ease pressure on the shift lever-push the shift lever allthe way into P (Park) and also release the shift leverbutton asyou maintain brake application. Then move the shift lever into thegear youwish.
Forward Gears Neutral N (Neutral):In thisposition, your engine doesn’tconnect with the wheel: To restart when you’re already moving, use N (Neutral) only. Also, use N wher your vehicle is being towed. NOTICE: Damage to your transaxle caused by shifting out of P (Park) or N (Neutral) with the engine racing isn’t covered by your warranty. D (Drive): This positionis for normal driving. 2 (Second Gear):This positiongives you more powerbut lower fuel economy You canuse 2 on hills.
Features & Controls 1 (First Gear): This position gives you even more power(but lower fuel economy) than 2. You can use it on very steep hills, or in deep snow or mud. If the selector lever isput in 1, the transaxle won’t shift into first gearuntil the vehicle is going slowly enough. 1 3 5 2 4 R NOTICE: If your front wheels can’t rotate, don’t try to drive. This might happen if you were stuck in very deep sand or mud or wereup against a solid object. You could damage yourtransaxle.
3 , 4 and 5 (Third, Fourth and Fifth Gears): Shift into 3 , 4 and 5 the same way you do for 2. Slowly letup on the clutch pedal as you press the accelerator pedal. To Stop: Let up on the accelerator pedal and press the brake pedal. Just before the vehicle stops, press the clutch pedal and the brake pedal, and shift to N (Neutral). N (Neutral): Use this position when you start oridle your engine. R (Reverse): To back up, press down the clutch pedal and shift into R (Reverse).
Features & Controls Shijling Into C(P JJ (Park) (AUTOMATIC TRANSAXLE MODELS ONLY) J Parking Brake The parking brake lever is located between the bucket seats. To Set the Parking Brake: Hold the brake pedal down and pull up on theparking brake lever. If the ignition is on, the brake system warning light will come on. To Release the Parking Brake: Hold the brake pedal down. Pullthe parking brake lever up until you can press the release button.
Leaving Yqur. Vebjcle W@h:,.the ., . :. . . . Engine Runriing .-‘j! ,. position likethis: Hold in the button on thelever, and push the lever all the way toward the frontof your vehicle. 3. Move the ignition keyto Lock. 4. Remove the key and take itwith you. If you can walk away from your vehicle with the ignition key in your hand, your vehicle isin P (Park).
Features & Controls Shifting Out of P (Park) (AUTOMATIC TRANSAXLE) Your Cheyrolet hasa brake-transaxle shift interlock.You have to fully apply your regular brakesbefore you can shift from P (Park) when the ignition is in the Run position. Seethe Index under Automatic Transaxb. If you cannot shift out of P (Park), ease pressure on the shift lever-push the shift lever all the way into P (Park) and also release the shift lever button onfloor shift console modelsas you maintain brake application.
Engine Exhaust Running YourEngine while You’re Parked (AUTOMATIC TRANSAXLE) It’s better not to park with the engine running. But if you ever haveto, here are some things to know. Follow the proper steps to be sure your vehicle won’t move. SeeShifting Into P (Park) in the Index.
Features & Controls i Le I h? Windows Power Windows (OPTION) Power Window Lock-Out Switch On a vehiclewith manual windows, use the window crank to open and close each window. With powerwindows, switches on the center console control each of the windows when the ignition is on. In addition, in 4-door models, each rear passenger door has a control switch for its own window. The driver’s windowswitch has an Auto Down feature.
Horn Tilt Steering Wheel (OPTION) You can sound the hornby pressing the A tilt steering wheel allows youto adjust thesteering wheel beforeyou drive. You canalso raise it to the highest levelto give your legs more room when you exit and enter the vehicle. To tilt the wheel, holdthe steering wheel and pull the lever. Movethe steering wheel to a comfortable level, then release the lever to lock the wheel in place. horn pad on your steering wheel.
Features & Controls Operation of Lights LLJ’ n Although your vehicle’s lighting system (headlights,parking lights, foglamps, side marker lightsand taillights) meets all applicable federal lighting requirements, certain states and provinces may applytheir own lighting regulations that may require special attention before you operate these lights, For example, some jurisdictions may Turn Signal and Lane Change require that you operate your lower Indicator beam lightswith fog lamps at all times, The turn sig
I 1c m Headlights I'urn the band marked turn on: Parking Lights Side Marker Lights Taillights License Plate Lights I'urn the band marked turn off the lights. . -:a-to PC to -:a-to OFF to Turn the band marked turn on: Headlights Parking Lights Side Marker Lights Taillights License Plate Lights Turn theband marked turn off the lights.
Features & Controls The high beam headlights will come on at reduced brightness in daylight when: The ignition ison The headlight switchis off, and The parkingbrake is released. When youturn on your headlights, the DRL will switch off and the exterior lights will comeon. When youturn off the headlights, the exterior lights will go out and the high beamswill change to the reduced brightness of DRL again. The DRL indicator light on the instrument panel will goon whenever the DRL are on.
\ - E Instrument Panel Intensity Control 1Dome Light To turn on thedome light, movethe You can brighten or dim the instrument 1lever allthe way up. panel lights by moving the control lever 1[n theDOOR position the illuminated up or down. :ntry/exit system is activated. To turn 3ff all interior lights, move the lever to OFF. ro Replace the Bulb: Grasp the center front andcenter rear 1portion of the housing and squeeze jFirmly but gently. The housing should 1pop off.
Features & Controls . .. .. .. . .:. . . . . . .. ...._ . . . . .. . . . .. ... ... . . . a 1 . . .. a ' .. ., . . . . 1 _ . . . . .. . . Rear Compartment Light(WAGON) Mindshield Wipers To turn on therear compartment light, press the buttonlocated on the light. To Replace the Bulb Grasp the center front and center rear portion of the housing and squeeze firmly but gently. The housing should pop off.
c II\ Intermittent Windshield Wipers 1Windshield Washer (OPTION) t If your vehiclehas intermittent windshield wipers, you can set the wiper speed fora long or short delay between wipes.This can be very useful in light rain or snow. Move the stalk to DEL, then rotate the band marked DELAY to choose the delay youwant. Rotate the band up for shorter delay times between wiper cycles. Rotate the band down for longelr delay times between wiper cycles.
Features & Controls NOTICE: When using concentrated washer fluid, followthe manufacturer’s instructions for adding water. Don’t mix water with ready-touse washer fluid. Water can cause the solution to freeze and damage your washer fluidtank and other parts of the washer system. Also, water doesn’t clean as well as washer fluid. *Fill yourwasher fluid tank only % full when it’s very cold.This allows for expansion, which could damage the tankif it is completely full.
To Increase speed While Using Cruise Control 3.Push in the SET button at the end of the lever and release it. 4. Take your footoff the accelerator pedal. There are two ways to go to a higher speed. Here’sthe first: 1. Use the accelerator pedalto get to the higher speed. 2. Push the button at the end of the lever, then release the button and the I I accelerator pedal. You’ll now cruise at the higher speed.
Features & Controls To Reduce Speed While Using Cruise Control There are two waysto reduce your speed while using cruise control: Push in the buttonat the end of the lever until youreach the lower speed you want, thenrelease it. To slow downin very small amounts, push the button for lessthan half a second. Each time youdo this, you’ll go 1mph (1.6 km/h) slower. Passing Another Vehicle While Using Cruise Control Use the accelerator pedalto increase your speed.
#- I Convex Outside Mirror Remote Control Mirror Your right side mirroris convex. A convex mirror’s surface is curved so you can see more fromthe driver’s seat The driver sideoutside mirror should be adjusted with the control lever onthe door so that you just seethe side of your vehiclewhen you ‘aresitting in a comfortable driving position. Adjust this mirror by hand so that you just see the side of your vehiclewhen you are sitting in a comfortable driving position.
Features & Controls . . ..- I SUR visors Cup Holder To block out glare, you can swing down the visors. To use the cup holder, slide it out from the dash. Use the right side for larger containers.
Ashtrays and lighter Rear Ashtray To cleanthe rear console-mounted To open the center console ashtray, lift ashtray, open it, push down on the the lid. snuffer and pull it out. To clean the ashtray, pull up on the LIFT tab along the left edge. NOTICE: To use the lighter, just push it in all the way and let go. When it’s ready, it will Don’t put papers and other things that burn into your ashtrays. If you pop back out by itself.
Features & Controls ro Open the Sunroof: EW,down on the latchrelease handle and then push it forward and up until tlhe glass panel locksinto place. 76 ro Remove the Sunroof Glass Panel:. With the.sunroaf open, press up on the glass .releasetab; located inside the latch release handle. ,I Li€t the pane1 up-ahd aut. The air deflector w ill automatically pap up. .
Store the glass panel inthe special storage bag in the trunk. 4. If you havethe optional fold-down rear seat, you can secure the storage bag containingthe glass panelto the trunk anchors using the straps provided.
Features & Controls To Install the Sunroof Glass Panel: 1. Center the glass panel uprighton the weatherstrip. Then line up the hinges on the panel with the slots in the roof opening. 2. Push forward on the rear edge of the glass while loweringthe panel. Do not force a hinge if it binds in a slot. Reposition the glass panel and start again. 3.Push the glass releasetab and engage the latch with the striker. Close the panel.
NOTICE: Roof Luggage Carrier (WAGON, OPTION) If you havethe optional luggage carrier, you can load things on top of your vehicle. The luggage carrier has slats attached to the roof, side rails, and tiedowns. Loading cargothat weighs more than 125 pounds (57 kg) on the luggage carrier may damage your vehicle. When you carry large things, never let them hang over the rear or the sides of your vehicle. Load your cargoso that it rests on the slats and does not scratch or damage the vehicle.
~~ Features & Controls 80
The Instrument PanelYour Information System Your instrument panel is designed to let you know at a glance howyour vehicle is running. You’ll know how fast you’re going, how much fuel you’re using, and many other things you’ll need to drive safely and economically. The main components of your instrument panel are: 1. Side Vent 2. Instrument Panel Intensity Control 3.Turn Signal/Multifunction Lever 4. Hazard Warning Flashers Switch 5. Instrument Cluster 6. Ignition Switch 7.
Features & Controls 2.2L L4 CLUSTER CAVALIER CHECK Instrument Panel Clusters Your Chevrolet is equipped with one of these instrument panel clusters, which include indicator warning lights and gages that areexplained on the following pages.Be sure to read about those thatapply to theinstrument panel cluster for your vehicle. E ,$ ' F,' & TEMP Speedometer and Odometer Your speedometer lets you see your speed in both miles perhour (mph) and kilometers perhour (ltm/h).
I 3.1L V6 CLUSTER E If the new one can be set to the mileage total of the old odometer, then it must be. But if it can’t, then it’s set at zero and a label must be put on the driver’s door to show the old mileage reading when the new odometer was installed. Trip Odometer (3.I L v6 ENGINE) Tachometer(3.1L v6 ENGINE) The trip odometer can tell you how far The tachometer displays the engine speed in revolutions perminute (rpm). your vehicle has been driven since you last set the tripodometer to zero.
Features & Controls 4 fi 260 WarningLights, Gages and Indicators This section describes the warning lights and gages that may beon your vehicle. Thepictures will help you locate them. Warning lightsand gages can signal that something is wrong before it becomes serious enough to cause an expensive repair or replacement. Paying attention to your warning lights and gages could also saveyou or others from injury. Warning lights goon when there may be or is a problemwith one of your vehicle’s functions.
It takes a little more or less fuelto fill up than thegage indicated. For example, the gage may have indicated the tank was half full, but itactually took a little more or less than half the tank’s capacity to fill the tank. The gage movesa little when you turn a corner or speed up. The gage doesn’t go backto E when you turn off the ignition. For your fueltank capacity, see Service Station Informationon the last page of this manual.
Features & Controls I CHECK m closer to the floor. It may take longer to stop. If the light is still on, have the vehicle towed for service.(See Towing Your Vehicle in the Index.) II L Charging SystemLight 9rake Sysfem Warning Light The charging system light will come on briefly when you turn on theignition and the engine is not running, as a check to show you it is working. Then it should go out.
If the regular brake system warning light is alsoon, you don’t have anti-lock brakes and there’s a problemwith your regular brakes. See Brake System Warning Light earlier inthis part. If the anti-lock brake system warning light ever flashes, your anti-lock brake system is still workingbut needs service as soon as possible. Anti-Lock Brake System Warning Light With anti-lock, this light will comeon when you start your engine and it will stay on for three seconds. That’s normal.
~~ Features & Controls NOTICE: I CHECK - 1 Malfunction lndicatorLamp (Check Engine Light) A computer monitors operation of your fuel, ignition and emission control systems. This light should come on when the ignition is on, but the engine is not running, as a check to show you it is working.If it does not come on at all,have itfixed right away. If it stays on, or it comes on while you are driving, the computer is indicating that you have a problem. You should take your vehiclein for service soon. ...
r c NOLANT CHECK OAGES D)(8, I If you make a hard stop, the light may come on fora moment. This is normal. ’ J \ Check GagesLight Oil Warning Light (2.2~~4 ENGINE) This light will come on briefly when yo1 are starting theengine. If the light comes on and stays on while youare driving, check your various gages to see if they are in the warning zones. This lightwill also comeon when the fuel level is low,1to 3 gallons (3.
Features & Controls \ \ e oil PfeSSUI'e Gage (3.7L V6 ENGINE) The oil pressure gage shows the engine oil presure in psi (pounds per square inch) when the engine is running. Canadian vehicles indicate pressure in 1tPa. Oilpressure may varywith engine speed, outside temperature, and oil viscosity, but readings abovethe red warning zone indicate the normal operating range. A reading in thered zone may be caused by a dangerously low oil level or other problem causing low oilpressure.
Part 3 Comfort Controls & Audio Systems I n this part you'llfind out how to operate the comfort control systems and audio systems offered with your Chevrolet. Be sure to read about the particular system supplied with your vehicle. Climate Control System............................................................................................ 92 Air Conditioning System.......................................................................................... 93 Rear Window Defogger ......................
Comfort Controls& Audio Systems IClimate Control System Nith this system, youcan control the rentilation and heating in your vehicle. four vehicle also has theflow-through Jentilation system describedlater in this rection. Lever Controls: The upper lever :hanges the functions of your system. rhe lower lever changesthe temperature If the air coming through the system. Slide the upper control lever to OFF to :urn off the system. 3f: Sets the fan speed. To select the :orce of air you want, turn theknob.
Air Conditioning System (OPTION) The air conditioner and heater work best if you keep your windows closed while usingthem. Your vehiclealso has the flow-throughventilation system described later in this section. Lever Controls:The upper lever changes the functions of your system. The lower lever changesthe temperature of the air coming through the system. Slidethe upper control lever to OFF to turn off the system. 3f: Selects the fan speed. To select the force of air you want, turn theh o b .
Comfort Controls & Audio Systems HTR (Heater): Use this setting to direct most of the air flow through the heater ducts, and some through the windshield defroster vents. If you have the optional engine coolant heater and use it during cold weather, 0°F (-18°C) or lower, your heating system will more quickly provideheat because the engine coolant is already warmed. Seethe Index under Engine Coolant Heater.
Do not attacha temporary vehicle license across the defogger gridon the rear window. NOTICE: Rear Window Defogger (owlonr) The rear window defogger uses a warming gridto remove fog fromthe rear window. Press thebutton and ill glow. The defogger an indicator lightw will turn off automatically after about 10 minutes of use. If you turn it on again, the defogger willoperate for about five minutes only. You can also turn the defogger off by pressing the button again, or by turning off the ignition.
Comfort Controls & Audio Systems Audio Systems Ventilation Tips Keep the hood and front air inlet free of ice, snow, or anyother obstruction (such as leaves). The heater and defroster will work farbetter, reducing the chance of fogging the inside of your windows. In cold weather,turn the blower fan to HI for afew moments before driving off. This helps clearthe intake ducts of snow and moisture, and reduces the chance of fogging the inside of your windows.
1 If- 7 1 pwR-VOL TREBLE TUNE BASS - c VSEEKA II I'LSCANA 1 2 3 4 s E T I No matter which audio system you have in your vehicle, setting the clock is easy. 1. With the ignition on and the radio on or off, press SET. The SET indicator will appear on thedigital screen for five seconds. 2. You must begin to set the clock to the correct hour and minute during those five seconds. If your audio system doesnot have a CD player: Press VSEEK to set the hour. Press SEEKA to set theminute.
Comfort Controls& Audio Systems BASS: Slide this lever up to increase bass, or down to decrease it. SEEK A: Press to seek and stop on the next station higher or lower on the radio band. SCAN: Press both SEEK buttons together to listen for a few seconds to the next station on the AM or FM band; the scan willcontinue every few seconds to the next station on the AM or FM band. The radio will scan upward if you press SEEKA first and downward if you press V SEEK first.
- PWR-VOL TREBLE AM/FM Stereo Radio with Cassette Tape Player The digital displayindicates information on time or radiostation frequency, the AM or FM radio band, whether the station is in stereo, and other radio functions. PWR-VOL (Power-Volume):With the ignition on, rotate theupper lmob to turn thesystem on and off, and to control the volume.
Comfort Controls & Audio Systems 1. Tune in the desired station. 2. Press SET. The word SET will AUTO DNR: This unit is equipped with an automatic Dynamic Noise appear on the digital display for five Reduction systemthat reduces background hiss onAM or FM radio seconds. broadcasts, as well as on cassette tapes. 3.While SET is displayed, pressone of the four pushbuttons. Whenever you Cassette Tape Player press thisbutton again, the preset With the power on, insert a tape into station will be tuned in.
Comfort Concr 5 & Audio Systems 4. Repeat steps 1-3 for each of five AM and five FM stations. Compact Disc Player Many of the controls for the radio also have functions for the compact disc player, as explained here. Don’t use mini-discs that are called singles. Theywon’t eject. Use only fullsize compact discs. 1. Turn the PWR-VOL knob to turnon the power. 2. Insert a disc part-wayinto theslot, with the label side up. The player will pull it in. Within a fewseconds, the disc should play.
2. Turn the ignition on. 3. Rotate the PWR-VOL knob to turn the radio off. 4. Press station preset buttons 1 and 4 at thesame time and hold until "- - -" shows on thedisplay. You now have only 15 seconds between each of the following steps. 5. Press SET and 000 will appear on the display. 6. Press SCAN until the first digit of your code appears. 7. Press SEEK until the second and third digits of your codeappear. CD Player Anti-Theft Feature Delco LOC II@is a security feature that 8.
Comfort Controls& Audio Systems 8. Press the TUNE knob. If the display Understanding Radio Reception shows "- - -,"the radio is unsecured FM Stereo and will play again.If the display FM Stereo will giveyou the best sound, shows SEC, the steps were not but FM signals will reach only about 10 successful andthe numbers didnot to 40 miles (16 to 65 l a ) . Tall buildings match the secret code. or hills can interfere with FM signals, If you lose or forget your code, see yourcausing the sound to come and go.
.," quality, try cleaning the tapeplayer. Proper tape player cleaningshould be done with a wiping action nonabrasive cleaner cassette. To properly clean your tape player, you should follow the directions on the cleaning cassette. Cassettes are subject to wear and the sound quality may degrade over time. Always verifythat thecassette tape is in good condition before obtaining service on your tape player. c. Fixed Mast Antenna Care of Your Compact Discs Handle discs carefully.
Notes
Part 4 Your Driving and the Road H e r e you’ll find information about driving on different kinds of roads and in varying weather conditions. We’ve alsoincluded many other usefultips on driving. .. .................................................................................................... Defensive Drlvmg 108 Drunken Driving ..................................................................................................... 108 Control of a Vehicle Braking .....................................
Your Driving and the Road Defensive Driving Just how much alcoholis too much if a IDrunken Driving person plans to drive? Ideally,no one The best adviceanyone can give about Death and injury associatedwith should drink alcohol and then drive. driving is: Drive defensively. drinking and driving is a national But if one does, then what’s “too Please start with a veryimportant safety tragedy.
Drinking That WIN Resuit in a BAC of -05% in the Time Shown 3 HOURS 2 HOURS 1 HOUR According to theAmerican Medical Association, a 180-pound (82 kg) person who drinks three 12-ounce (355 ml) bottles of beer in an hour will end up with a BAC of about 0.06 percent. The person would reach the same BAC by drinking three 4-ounce (120 ml) glassesof wine or three mixed drinks if each had 1H ounces (45 ml) of a liquor like whiskey, ginor vodka. It’s the amount of alcohol that counts.
Your Driving and the Road true for brain, spinal cordand heart injuries. That means that if anyone who has been drinking-driver or passenger is in a crash, the chance of being killedor permanently disabledis higher than if that person hadnot been drinking. And we’ve already seen that the chance of a crash itself is higher for drinking drivers. - Bruking Braking action involvesperception time and reaction time. First, you have to decide to push on the brake pedal.
And, of course, actual stopping distances vary greatlywith the surface of the road (whether it’s pavement or gravel); the condition of the road (wet, dry, icy); tire tread; and thecondition of your brakes. Avoid needless heavy braking. Some people drive in spurts -heavy acceleration followedby heavy braking - rather thankeeping pacewith traffic. This is a mistake. Your brakes may not have timeto cool between hardstops. i l l wear out much faster if Your brakesw you do a lot of heavy braking.
Your Driving and the Road L- And you may evennotice that your brake pedal moves a little while this is going on. This isthe ABS system testing itself. If there’s a problem with the anti-lock brake system, the anti-lock brake system warning light will stayon or flash. See Anti-lock Brake System Warning Light in the Index. Here’s how anti-lock works. Let’s say the road is wet. You’re driving safely. Suddenly an animal jumps out in front of you. You slam on the brakes. Here’s what happens with ABS.
Braking in Emergencies Use your anti-lock braking system when you need to. With anti-lock, you can steer and brake at the same time. In many emergencies,steering can help you more than even the very best braking. Power Steering If you lose powersteering assist because the engine stops or the system is not functioning, you can steer but it will take much more effort. Steering Tips accelerate.
Your Driving and the Road P . . Steering in Emergencies There are times when steering can De more effectivethan braking. For example, you come over a hill and find a truck stopped in your lane, or a car suddenly pullsout fromnowhere, or a child darts outfrom betweenparked cars and stops right in front of you. You can avoid these problems by braking if you can stop in time. But sometimes you can't; there isn't room. That's the time for evasive action - steering around theproblem.
Passing The driver of a vehicle about to pass another ona two-lane highwaywaits for just theright moment, accelerates, moves around thevehicle ahead, then goes backinto theright lane again. A simple maneuver? Not necessarily! Passing another vehicle on a two-lane highway isa potentially dangerous move, sincethe passing vehicle occupiesthe same lane as oncoming traffic for several seconds.
Your Driving and the Road If you’re being passed, make it easy for thefollowing driverto get aheadof you. Perhaps you can easea little to the right. Skidding In a skid, a driver can lose controlof the vehicle. Defensive drivers avoid most skidsby taking reasonable care suited to existing conditions, and by not “overdriving” those conditions. But skids are always possible.
your eyes to readjust to thedark. When you are faced with severe glare(as from a driverwho doesn’t lower the high beams, or a vehiclewith misaimed headlights), slow down a little. Avoid staring directly into theapproaching lights. Keep your windshieldand all the glass Night Vision on your vehicle clean-inside and out. No one can see as well at night as in the Glare at night is made much worse by dirt on the glass. Eventhe inside of the daytime.
Your Driving and the Road Driving in the Rain Rain and wet roads can mean driving trouble. On a wet road you can’tstop, accelerate or turn as well because your tire-to-road traction isn’t as good as on dry roads. And, if your tires don’t have much tread left, you’ll get even less traction. It’s always wiseto go slower and be cautious if rain starts tofall while you are driving. The surfacemay get wet suddenly when your reflexes are tuned fordriving on dry pavement.
Your Driving and the Road Treat a green lightas a warning signal. A traffic lightis there because the corner is busyenough to need it. When a light turns green, and just before you start to move, checkboth ways for vehicles that have not cleared the intersection or may be running the red light. Freeway Driving ~ Mile for mile, freeways(also called thruways, parkways, expressways, turnpikes, or superhighways)are the safest of all roads. But they havetheir own special rules.
Reduce your speed according to your speedometer, not to your senseof motion. After driving forany distance at higher speeds, you maytend to think you are going slowerthan you actuallyare. Before Leaving ona Long Trip Make sure you’re ready. Try to be well rested. If you must start when you’re not fresh - such as after a day’s work - don’t plan to make too many miles that first part of the journey. Wear comfortable clothing and shoes you can easily drive in.
Your Driving and the Road Hill and Mountain Roads Driving on steep hills or mountains is different from drivingin flat or rolling terrain. If you drive regularlyin steep country, or if you’re planningto visit there, here are some tips that canmake your trips safer and more enjoyable. Keep your vehicle in goodshape. Check all fluid levelsand also the brakes, tires, cooling system and transaxle. These parts can work hard on mountain roads. Know how to go down hills.
4 Winter Driving Here are some tips for winter driving: Have your Chevroletin good shape for winter. Be sure your engine coolant mix iscorrect. You may want to putwinter emergency suppliesin your trunk. Include an ice scraper, a smallbrush or broom, a supply of windshield washer fluid, a rag, somewinter outer clothing, a small shovel, a flashlight, a red cloth, and a coupleof reflective warning triangles.
Your Driving and the Road Whatever the condition - smooth ice, packed, blowing or loose snow-drive with caution. Accelerate gently. Try not to break the fragile traction. If you accelerate too fast, the drive wheels will spin and polishthe surface under the tires even more. Your anti-lock brakes improve your ability to make a hardstop ona slippery road. Even though you have the antilock braking system, you’ll want to begin stopping soonerthan you would on dry pavement. SeeAnti-lock in the Index.
Run your engine only as long as you must. This saves fuel. When you run the engine, malteit go a little faster than just idle. That is, push the accelerator slightly. This uses less fuel for the heat that you get and it keeps the battery charged. You will need a well-charged battery to restart the vehicle, and possibly for signaling later on with your headlights. Letthe heater run for awhile. Then, shut theengine off and close the window almost allthe way to preserve the heat.
Your Driving andthe Road n 0 Towing Your Vehicle from the Rear I NOTICE: Do not tow your vehicle fromthe rear. Your vehiclecould be badly damaged and the repairs would not be coveredby your warranty. TowingA Trailer Your Chevrolet isneither designed nor intended to tow a trailer.
Part 5 Problems on the Road H e r e you’ll find what to do about someproblems that can occur on the road . Hazard Warning Flashers....................................................................................... Jump Starting .......................................................................................................... Towing Your Vehicle.............................................................................................. Engine Overheating......................................
Problems on the Road Jump Starting If your battery hasrun down, you may want to use another vehicle and some jumper cables to start your Chevrolet. But please followthe steps below to do it safely. Move the switch to the right to male your front and rear turn signal lights Your hazard warning flashers let you flash on andoff. warn others. They also let police know you have a problem.
NOTICE: 2. Get the vehicles. close enoughso the jumper cables can reach, Ijut be suke the vehicles aren’t touching each Ignoring these steps could result in other. If they are, it could cause a costly damageto your vehiclethat ground connectionyou don’t want. wouldn’t be coveredby your You wouldn’t be ableto startyour warranty. Trying to startyour Chevrolet, and the bad grounding Chevrolet by pushing or pullingit could damagethe electrical systems.
Problems on the Road 5. Check that thejumper cables don’t have looseor missing insulation. If they do, you could get ashock. The vehicles could be damaged,too. Before you connect the cables, here are some basicthings you should know. Positive (+) will go to positive (+) and negative (-) will go to negative (-) or a metal enginepart. Don’t connect (+) to (-) or you’ll get a short that would damagethe battery and maybe other parts, too. 6.
~~ 7. Don’t let the otherend touch metal. 9. Attach the cable at least 18 inches Connect it to thepositive (+) terminal of the good battery. Usea remote positive (+) terminal if the vehicle has one. 8. Now connect the black negative (-) cable to the good battery’s negative(-) terminal. Don’t let the otherend touch anything until the next step. The other end of the negative cable doesn’t go to thedead battery. It goer to a heavy unpainted metal part on the engine of the vehicle withthe dead battery.
Problems on the Road A B ITowing Your Vehicle Try to have aGM dealer or a xofessional towing servicetow your Zhevrolet. The usual towing equipment S: :A)Sling-type towtruck :B)Wheel-lift tow truck C) Car carrier f your vehicle has been changedor nodified sinceit was factory-newby ldding aftermarket items like fog lamps, iero skirting, or special tires and uheels, these instructions and llustrations may not be correct. Before youdo anything, turn on the lazard warning flashers. .
When your vehicleis being towed, have the ignition key off. The steering wheel should be clampedin a straight-ahead position, with a clamping device designed for towing service.Do not use the vehicle’s steering column lock for this. The transaxle should be in N (Neutral) and the parking brake released. Don’t have your vehicle towedon the front wheels, unless you must.
Problems on the Road NOTICE: NOTICE: Do not tow with sling-type equipment or fascia damage will occur. Use wheel-lift or car carrier equipment. Additional ramping may be required for car carrier equipment. Use safety chains and wheel straps. Towing a vehicle over rough surfaces could damagea vehicle. Damage can occur from vehicle to ground or vehicleto wheel-lift equipment. To help avoid damage, install a towing dolly and raise vehicle until adequate clearance is obtained betweenthe ground 2.
Towing from the Rear- Vehicle Hook-up Before hooking up to a tow truck, be sure to read all the information in Towing Your Vehicle earlier in this section. Also be sure to use the proper hook-up for your particular vehicle. All Models: 1. Attach T-hook chains on bothsides in the slotted holes in thebottom of the frame rail just ahead of the rear wheels. 2. Position lower slingcrossbar directly I- -24Model: under the rear bumper.
r Problems on the Road All Models: NOTICE: Towing a vehicle over rough surfaces could damage a vehicle. Damage can occur from vehicleto ground or vehicle to wheel-lift equipment. To help avoid damage, install a towing dolly and raise vehicle until adequate clearance is obtained betweenthe ground and/or wheel-lift equipment. Do not attach winch cables or J-hooks to suspension components when using car carrier equipment. Always use T-hooksinserted in theT-hook slots. I I 3.
I NOTICE: If your engine catches fire because you keep driving with no coolant, your vehiclecan be badly damaged. The costly repairs would not be covered by your warranty. I f No Steam Is Coming From your Engine If you get the overheat warning but see or hear no steam, the problem may not be too serious. Sometimes the engine can get alittle too hot when you: Climb a long hillon a hot day. Stop after high speed driving. Idle for long periodsin traffic.
Problems on the Road NOTICE: Engine damage fromrunning your engine without coolant isn’t covered by your warranty. The coolant level should be at or above FULL COLD. If it isn’t, you may have a leak inthe radiator hoses, heater hoses, radiator, water pump or somewhere elsein the cooling system. If there seems to be no leak, check to see if the electric enginefan is running. If the engine is overheating, the fan should be running. If it isn’t, your vehicle needs service. coohg Sy&n (3.
I ’ . I . _ I NOTICE: Engine damagefrom running your engine without coolant isn’t covered by your warranty. The coolant level should beat or above FULL COLD.If it isn’t, youmay have a leak in theradiator hoses, heater hoses, radiator, water pump or somewhere elsein thecooling system. If there seems to be no leak, checkto running. see if the electric engine fan is If the engine is overheating,the fan should berunning. If it isn’t, your vehicle needs service.
Problems on the Road I InNOTICE: I coldweather, water can freeze and crack the engine, radiator, heater core and other parts. Use the recommended coolant. When the coolant inthe coolant recovery tank is at or above the FULL COLD mark, start your vehicle. If the overheat warningcontinues, there's one more thing you can try. You can add the proper coolantmix directly to the radiator but be sure the cooling system is cool beforeyou do it.
I I 2.2L ] How to Add Coolant to the 2.21 14 Engne at the Radiator 1. You can remove the radiator pressure cap when the cooling system, including the radiator pressure cap and upper radiator hose, is no longer hot. Turn thepressure cap slowly to the left until it first stops. (Don’t press down while turning the pressure cap.) If you hear a hiss, wait for that tostop. A hiss means there is still some pressure left. n I 2.2L 2. Then keep turning the pressure cap, but now push down as you turn it.
Problems on the Road I II- 4. Then fill the coolant recovery tank to FULL COLD. m . 4 142 m 5. Put the cap back on the coolant recovery tank, but leave the radiator pressure cap off. 6. Start theengine and let it run until you can feel the upper radiator hose getting hot. Watch out for the engine fan. 7. By this time the coolant level inside the radiator filler neck may be lower.
II R 8. Then replace the pressure cap. At anj time duringthis procedure if coolant begins to flow out of the filler neck, reinstall the pressure cap. Be sure the arrows on pressure cap line up like this. How to Add Coolant to the 3.
Problems on the Road 1. You can remove the coolant surge tank pressure cap when the cooling system, includingthe coolant surge tank pressure cap and upper radiator hose, is no longer hot. Turn the pressure cap slowly to theleft until it first stops. (Don't press down while turning the pressure cap.) If you hear a hiss, wait for that to stop. A hiss means there is still somepressure left. 2. Then keep turning the cap, but now push down as you turn it. Remove the pressure cap.
3. Fill the coolant surge tank with the proper mix, up to the FULL COLD mark. 4. With the coolant surge tank pressure 5. By this time, the coolant level inside cap off, start theengine and let it run until you can feel the upper radiator hose getting hot. Watch out for the engine fan. the coolant surge tank may be lower. If the level is lower,add more of the proper mix to thecoolant surge tank until the level reaches the FULL COLD mark. 6. Then replace the pressure cap.
Problems on the Road If a front tire fails, the flat tire will create a drag that pulls the vehicle toward that side. Take your foot off the accelerator pedal and grip the steering wheel firmly. Steer to maintain lane position, then gently brake to a stop well out of the traffic lane. A rear blowout, particularlyon a curve, acts much like a skidand may require the same correction you’d usein a skid. In anyrear blowout, remove yourfoot from the accelerator pedal.
. 1. If you have carpeting, pull it back from the floor of the trunkor rear area. 2. Turn thecenter retainer nut on the compact spare tire housing counterclockwiseto remove it, then lift the tire cover. You will find the jacking instructions label on the underside of the tire cover. . 3. If your vehicle is equippedwith a spare tire housing lid hook, pull the front of the lid up and hook it to the rear upper edge of the trunk. 4.
Problems on the Road 5. Remove the band around thejack. Turn the jack handle cloclnvise to raise the jack head a few inches. For 2-24Models: On 2-24 models, a cover plate must be removed to access the wheel nuts. Remove the cover plate usingthe flat end of a wheel wrench. 7. Using the wheel wrench, remove the plastic cap nuts and loosen all the wheel nuts. Don’t remove the wheel nuts yet.
~~ ~ ~~ 9. Position the jack under the vehicle. 8. Near each wheel wellis a notch in Raise the jack headuntil it fits firmly into thenotch in the vehicle's frame nearest the flat tire. Do not raise the vehicle yet. Put thecompact spare tire near you. the frame which the jack headfits in (A).The front notch is 9" (23 cm) back from the rear wheel well.The rear notch is 8" (20 cm) forward from the rearwheel well.
Problems on the Road F J 14. Lower the vehicle by rotating the jack handle counterclockwise. Lower the jack completely. 13. Replace the wheel nuts with the rounded end of the nutstoward the wheel. Tighten each nut by hand until the wheel is held against the hub. 12. Remove anyrust or dirt from the wheel bolts, mounting surfaces and spare wheel. Placethe spare on the mounting surface.
the wheel cover and plastic capnuts in the trunk orrear area untilyou have the flat tire repaired or replaced. Compact Spare Tire Although the compact spare was fully inflated when your vehicle was new, it can lose air after a time. Check the I I C E : inflation pressure regularly.It should be Wheel covers won’tfit on your compact 60 psi (420 1cPa). After installingthe spare.
Problems on the Road Rocking your vehicle to get it out: First, turn your steering wheel left and right. That will clear the area around your front wheels. Then shift backand forth between R (Reverse) and a fonGard gear (or with a manual transaxle, between First or Second gear and Reverse), spinning the wheels as little as possible. Releasethe accelerator pedal while youshift, and press lightly on the accelerator pedal when the transaxle is in gear.
Part 6 Service and Appearance Care Service ..................................................................................................................... Fuel .......................................................................................................................... Hood Release........................................................................................................... Engine Oil ..........................................................................................
Service & Appearance Care You should keepa record with all parts receipts and list the mileage and the date of any service work you perform. See Maintenance Record in the Index. Service Your Chevrolet dealer knows your vehicle bestand wants you to be happy with it. We hope you’ll goto your dealer for all your serviceneeds. You’ll get genuine GM parts and GM-trained and supported service people. We hope you’ll want to keep your GM vehicle all GM.Genuine GM parts have one of these marks.
If you’re using fuelrated at 87 octane or higher and you stillhear heavy knocking, your engine needs service. But don’t worry if you hear a little pinging noisewhen you’re accelerating or driving up a hill. That’s normal, and you don’t haveto buy a higher octane fuel to get rid of pinging. It’s theheavy, constant knock that means you have a problem. What about gasoline with blending materials that contain oxygen (oxygenates),such asMTBE or alcohol? MTBE is “methyl tertiary-butylether.
. . Service & Appearance Care Fuels in Foreign Countries If you plan on driving inanother country outside the U.S. or Canada, unleaded fuel may behard to find. Do not use leaded gasoline.If you use even one tankful, your emission controls won’t workwell or at all. With continuous use, spark plugscan get fouled, the exhaust system can corrode, and your engine oil can deteriorate quickly. Your vehicle’s oxygen sensor will be damaged.
Be careful not. tospill gasohe: Clean gasoline frompainted surfaces as soon as possible. See Cleaning the Outside of Your Chevrolet in theIndex. When youput thecap back on, turn it to theright until you hear at least three clicks. NOTICE: I While refueling,hang the cap inside the fuel door. If you need a newcap, be sure to get the right type. Your dealercan get one for you.If you get the wrong type, it may not fit or have proper venting, and your fueltank and emissions system might be damaged.
Service & Appearance Care t Hood Release To open the hood, first pullthe hood release handle insidethe vehicle. Lift the hood, release the hood prop Then go to the front of the vehicle and push the secondary hood release handle from its retainer and put the hood prop into the slot in the hood. Use the prop to the right. rod sleeve when handlingthe prop rod.
Before closing the hood, be sure all the filler capsare on properly. Then lift the hood to relieve pressure onthe hood prop. Remove the hood prop fromthe slot in the hood andreturn theprop to its retainer. Then just let the hood down and close it firmly.
Service & Appearance Care 2.21 L4 Engine CODE^) When you openthe hood, you’ll see: 1. Engine CoolantRecovery Tank 2. Power Steering Fluid Reservoir 3. Automatic Transaxle Fluid Dipstick (if equipped) 4.Brake Fluid Reservoir 5. Hydraulic Clutch Fluid Reservoir(if equipped) 6. Windshield Washer Fluid Reservoir 7. Battery 8. Air Cleaner 9. Engine Oil Dipstick, Engine Oil Fill Cap IO.
3.7L V6 Engine (CODE TI When you open the hood, you’ll see: 1. Coolant SurgeTank 2. Power Steering Fluid Reservoir 3.Automatic Transaxle Fluid Dipstick (if equipped) 4. Brake Fluid Reservoir 5. Hydraulic Clutch Fluid Reservoir (if equipped) 6. Battery 7. Windshield Washer Fluid Reservoir 8. Air Cleaner 9. Engine Oil Fill Cap IO.
Service & Appearance Care Engine Oil When to Add Oi/ If the oil warning lighton the instrument panel comeson, it means you need to check your engine oil level right away. For more information, see Engine Oil Warning Lightin the Index. You should check your engine oil level regularly; this is an added reminder. It’s agood idea to check your engine oil 2.2L L4: Checking Engine Oil every time you get fuel. In orderto get an accurate reading,the oil must be warm and the vehicle must be on level ground.
RECOMMENDED SAE VlSCOSlTy GRADE ENGINE OILS FOR BEST FUEL ECONOMYAND COLD STARTING, SELECT THE LOWEST SAE VISCOSITY GRADEOIL FORTHEEXPECTEDTEMPERATURERANGE. HOT YNE, 2.2L L4: Adding Engine Oil 3.1 L V6: Addlng Engine Oil ”F ’C What Kind of Oil to Use tlOO t38 Beginning midyear 1993, oils of the ?roper quality for your vehicle will be .dentifiedwith this new “starburst” iymbol.
Service & Appearance Care use SAE 1OW-30 if it’s going to be 0°F (-18°C) or above. These numbers on an oil container show its viscosity, or thickness. Donot use other viscosity oils, such as SAE 1OW-40 or SAE 20W-50.
Engine Coolant Heater (Engine Block Heater) An engine coolantheater can be a big help if you haveto park outside in very cold weather, 0°F (-18°C) or colder. If your vehicle hasthis option, see Engine Coolant Heater in theIndex. What to Do with Used Oil Did you know that used engine oil contains certain elements that may be unhealthy for your skin and could even cause cancer? Don’tlet used oil stay on skin your skin for very long. Clean your and nails with soap and water, or a good hand cleaner.
Service & Appearance Care 2.2L L4: Air Filter Replacement To check or replace the filter, remove the two wingnuts and lift the cover. Be sure to reinstall the air cleaner filter and replace the cover tightly. 3.1 L V6 (Except2-24):Air Filter Replacement 3.1 L V6 (2-24):Air Filter Replacement To check or replacethe filter, remove the three wing nuts and lift the cover. Be sure to reinstali the air cleaner filter and replace the cover tightly. three clips and removethe cover.
IAutomatic Transaxle Fluid 1 When to Check and Change A goodtime to check your automatic transaxle fluid levelis when the engine oil is changed. Refer to the Maintenance Schedule to determine when to change your fluid. See Scheduled Maintenance Services in theIndex. How to Check Because this operation can be a little difficult, you maychoose to have this done at your Chevrolet dealership Service Department.
Service & Appearance Care How to Add fluid 2.2L L4: Checking Automatic Transaxle Fluid 3.1L V6: Checking Automatic Transaxle Fluid . 168 Refer to the Maintenance Scheduleto determine what kind of transaxle fluid to use. See Recommended Fluids and Lubricants in the Index. If the fluid level is low, add only enough of the proper fluidto bring the level into the cross-hatched area on the dipstick. 1. Pull out thedipstick. 2.
4. If the fluid levelis where it should be, Manual TransaxleFluid push the dipstick back in all the way and flip the handle down. If the fluid level is low, addmore fluid as described in the next steps. When to Check A goodtime to have it checked iswhen the engine oil is changed. However, the fluid in your manual transaxle doesn't require changing. How to Check Because this operation can be alittle difficult, you maychoose to have this done at a Chevroletdealership Service Department.
~~ ~ Service & Appearance Care fluid. SeeOwner Checks andServices and Recommended Fluids and Lubricants in the Index. How to Check You do not need to check the fluid level unless you suspect a clutch problem. To check the fluid level,take the cap off. If the fluid reaches the step inside the reservoir, the fluid level iscorrect. What to Use Use a mixture of one-half clean water (preferably distilled) and one-half antifreeze that meets “GM Specification 1825-M,” which won’t damage aluminum parts.
NOTICE: If you use an improper coolant mix, your engine could overheat and be badly damaged.The repair cost wouldn't be coveredby your warranty. Too muchwater in the mix can freeze and crackthe engine, radiator, heater core and other parts. Adding Coolant-2.2L 14 Engine To Check Coolant When your engineis cold, the coolant level should beat FULL COLD, or a little higher. When your engine is warm, the level should beat FULL COLD or higher.
~ ~~ ~~ ~ Service & Appearance Care Radiator Pressure Cap NOTICE: Adding Coolant-3. IL V6 Engine To Check Coolant When your engine is cold,the coolant level should beat FULL COLD, or a little higher. To Add Coolant If you need more coolant, addthe proper mix at the surge tank. D lI D I72 Your radiator cap is a15 psi (105 kPa) pressure-type cap and must be tightly installedto prevent coolant loss and possible engine damage from overheating.
What to Add Refer to theMaintenance Schedule to determine what kind of fluid to use. See Recommended Fluids and Lubricants in the Index. NOTICE: IPower Steering Fluid How To Check Power Steering Fluid Unscrew the cap and wipe the dipstick with a clean rag. Replacethe cap and completely tightenit. Then remove the cap againand look at thefluid levelon the dipstick. When the engine compartment is hot, the level should benear the H mark. When the engine compartment is cool, the level should benear the C mark.
Service & Appearance Care fluid. Adding brake fluid won’t correct a leak. If you add fluid when your linings are worn, then you’ll havetoo much fluid when you get new brake linings. You should add (or remove) brake fluid, as necessary, only when workis done on thebrake hydraulic system. NOTICE: When using concentrated washer fluid, followthe manufacturer’s instructions for adding water. Don’t mix water with ready-touse washer fluid.
I Use new brake fluid from a sealed container only, and always cleanthe brake fluid reservoircap before removing it. NOTICE: DOT-5 silicone brake fluid can damage your vehicle. Don’t use it. Don’t letsomeone put in the wrong kindof fluid. For example, just a few drops of mineral-based oil, such as engine oil, in your brake system can damage brake system parts so badly that they’ll have to be replaced. Brake fluid can damagepaint, so be carefulnot to spill brake fluid on your vehicle.
Service & Appearance Care If your brake pedal goesdown farther than normal, yourrear drum brakes may need adjustment. Adjust them by backing up and firmly applyingthe brakes a few times. Replacing Brake System Pa& The braking systemon a modern vehicle is complex.Its many parts hawe to be of top quality and work well together if the vehicle is to have really Contact your dealerto learn howto good braking.
Headlight Bulb Replacement 2. Pull out thebulb assembly. 3. Disconnect the bulb base fromthe For the type of bulb, see the Index socket by lifting the plastic locking under Replacement Bulbs. tab. 1. Turn the lock ring clockwiseuntil the 4. Snap a new bulb into the socltet. flanges alignwith the slots in the housing. Then pull the ring back from 5. Replace the bulb assemblyby the housing. reversing steps 1-3. Taillight Bulb Replacement For the type of bulb, see the Index under Replacement Bulbs.
_ _ ~ Service & Appearance Care 2-Door Models: 1. Pull the carpet back from the corner and remove the plastic wing nuts. If you have the optional convenience net, first unhook the netfrom the retainer and remove the retainer knob. Both 4-DOOr and 2-Door Models: 2. From outside the vehicle, gently pull back on the taillight housing. 3.Press the bulb housing release lever and turn thehousing 1/6 turn countercloclnvise to remove it. 4. To removethe bulb, push in and turn it countercloclnvise. 5.
3. Pull back gentlyon thetaillight i.To remove the bulb, push the bulb in, housing. 4. Press the bulb housing tab, rotate the housing counterclockwise% turn and remove it. and rotate it counterclockwise. 5. Push in the new bulband turn it cloclnvise. 7. Reverse allsteps to reassemble the taillight housing. Windshield Wiper Blade Replacement Replacement blades come in different types and are removed in different ways. Here’s howto remove the type with a release clip: 1.
Service & Appearance Care The other label isthe Certification label, found on the rear edge of the driver's door. It tellsyou the gross weight capacity of your vehicle, calledthe GVWR (Gross Vehicle Weight Rating). The GVWR includes the weight of the vehicle, all occupants, fuel and cargo. Never exceed the GVWR for your vehicle, or the Gross Axle Weight Rating (GAWR) for either the front or rear axle.
Tires We don’t make tires. Your new vehicle comes with high qualitytires made by a leading tire manufacturer. These tires are warranted by the tire manufacturers and their warranties are delivered with every new Chevrolet.If your spare tire is a different brand than your roadtires, you will have a tire warranty folder from each of these manufacturers.
Service & Appearance Care Inflation-Tire Pressure The Tire-Loading Information label which ison the rear edge of the driver’s door shows the correct inflation pressures for your tires, when they’re cold. Cold means your vehiclehas been sitting for at least three hours or driven no more than a mile. NOTICE: Don’t let anyone tell youthat underinflation or overinflation is all right. It’s not.
When to Check Check yourtires once a month or more. Don't forget your compactspare tire. It should be at 60 psi (420 1tPa). How to Check Use a good quality pocket-type gageto check tire pressure. Simply lookingat the tires will not tell youthe pressure, especially if you have radialtires which may look properly inflated even if they're underinflated. If your tires have valve caps, besure to put them back on. They help prevent leaks by keeping out dirt and moisture.
Service & Appearance Care Buying New Tires To find out what kind and sizeof tires you need, look at the Tire-Loading Information label. The tires installedon your vehicle when it was new had a Tire Performance Criteria Specification (TPC Spec) TREAD WEAR INDICATORS number on each tire’s sidewall. When you get newtires, get ones withthat same TPC Spec number.
Uniform Tire Qualify Grading The following information relates to the system developedby the United States National Highway Traffic Safety Administration which grades tires by treadwear, traction and temperature performance. (This applies only to vehicles soldin the United States.) Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specifiedgovernment test course.
Service & Appearance Care Wheel Alignment andTire Balance Wheel Replacement The wheels on your vehiclewere Replace any wheel that is bent, cracked aligned and balanced carefullyat the or badly rusted. If wheel nuts keep factory to give you the longest tire life coming loose,the wheel, wheelbolts, and best overall performance. and wheel nuts should be replaced.If the wheel leaks air, replace it (except In most cases, you will not need to have some aluminum wheels, which can your wheels aligned again.
I Used Replacement Wheels Tire Chains . . . NOTICE: If your Chevrolet has P195/70R14, P195/65R15 or P205/60R15 size tires, don’t use tire chains; they can damage your vehicle.If you have other tires, use tire chains only where legaland only when you must. Use only S A E Class “S” type chains that are the proper size for your tires. Install them on the front tires and tighten them as tightly as possible with the ends securely fastened. Drive slowly and follow the chain manufacturer’s instructions.
Service & Appearance Care Never use these to clean your vehicle: Gasoline Benzene Naphtha Carbon Tetrachloride Acetone Paint Thinner Turpentine Lacquer Thinner Nail Polish Remover They can all behazardous - some more than others - and they can all damage your vehicle,too. NOTICE: Don’t use anyof these unless this manual says you can.
Fabric hotection Non-Greasy Stains NOTICE: Such as catsup,coffee (black), egg, Your Chevrolet has upholsterythat has Be careful with a hair dryer or heat fruit juice, milk, softdrinks, wine, fruit, been treated with Scotchgard’” Fabric lamp. You could scorchthe fabric. Protector, a 3M product. ScotchgardTM vomit, urine and blood. protects fabrics by repelling oil and Carefully scrape off excess stain, then water, which are the carriers of most Wipe with a clean cloth.
Service & Appearance Care Cleaning Vinyl Use warm water and a clean cloth. Rub with a clean, damp cloth to remove dirt. You may haveto do it more than once. Things liketar, asphalt and shoe polish will stain if you don’t get them off quickly. Use a clean cloth and a solvent-type vinylcleaner. Cleaning theTop of the Instrument Panel Use only mildsoap and water to clean the topsurfaces of the instrument panel.
Clean the outside of the windshield with GM Windshield Cleaner, Bon-Ami Powder@ (GMPart No. 1050011).The windshield is cleanif beads do not form when you rinse it with water. Clean the blade by wiping vigorously with a cloth soakedin full strength windshield washer solvent. Then rinse the blade with water. Wiper blades should be checked on a regular basisand replaced when worn. soaps. Don’t usecleaning 8 @o&-that contain acid or abrasives.
Service & Appearance Care To clean white bumper covers, firstuse Tar and Oil Remover. If the dark areas are still visible,whiten with White Sidewall Tire Cleaner,such as GM Part No. 1050174. Finish Careof T d r e d SurJace Bumper Covers To touch up any smallspots after regular washing,use a solvent-type fabric cleanersuch as GM Part No. 1050214 and a clean, dry cloth. To help maintain bumper covers, after washing use a cleaner/protectant like GM/Armor All" Part No. 1052919.
Finish Damage Any stone chips, fractures or deep scratches in the finish should be repaired right away. Bare metal will corrode quickly and may developinto a major repair expense. Minor chipsand scratches can be repaired with touch-up materials available from your dealer other or service outlets. Larger areas of finish damage can be correctedin your dealer's bodyand paint shop. Underbody Mahtenanm .
Service & Appearance Care Engine ldenfificafion The eighth character in your VIN is the engine code. This code will help you identify your engine, specifications,and replacement parts. SASE Ikhicle Identification Number This isthe legal identifier for your Chevrolet. It appears on a plate inthe front corner of the instrument panel, on the driver's side. You can see it if you look through the windshield from outside your vehicle.
NOTICE: Don’t add anything electricalto your Chevrolet unless you check with your dealer first. Some electrical equipment can damage your vehicle and thedamage wouldn’t be covered by your warranty. Some The fuse panelis located under the add-on electrical equipment can lower left sideof the instrument panel. keep other components from working as they should. To identify and check fuses, refer to the Fuse Usage chart. Fuses & Circuit Breakers Look at thesilver-colored band inside the fuse.
Service & Appearance Care Fuse INST LPS ECM DR UNLK CIG LTR RDO 2 GAUGES Rating (AMP.
Headlight Wiring Windshield Wipers The headlight wiring is protectedby a circuit breakerin the fuseblock. An electrical overloadwill cause the lights to go on andoff, orin some cases to remain off. If this happens, have your headlight system checked right away. To access the headlight circuit breaker, squeeze the plastic clip togetherand remove. The windshield wiper motor is protected by a circuit breakerand a fuse. If the motor overheats due to heavy snow, etc., thewiper will stop until the motor cools.
Service & Appearance Care Capacities & Specifications Engine Crankcase.......................................................................................... 4.0 quarts 3.80 L When changing filter, up to0.5 quart (0.5 liter) more oil may be needed. Automatic Transaxle .................................................................................... Pan Removal and Replacement................................................................... 4.0 quarts 3.80 L After Complete Overhaul...................
, Fluids & Lubricants ITEM APPLICATION GM PART NUMBER SIZE Antifreeze Coolant...................................... .Year-Round Antifreeze for (3.8 L) 1 gal. Coolant Mixtures ........................................ 1052753 (Ethylene Glycol Base) 14 oz. 1052497 Chassis Lubricant (Grease Gun Insert) ..... General Chassis Lube, etc. ........................... (397 8) (0.5 L) 16 oz. Delco Supreme 1l@ Brake Fluid ................ Brake Systemand Clutch Master Cylinder...
Replacement Bulbs OUTSIDE LIGHTS BULB Back-up Lights .......................................................................... Front Parkinflurn Signal Lights ............................................ Center High Mount Stoplight Inside (Carpet Covered) ......................................................... Inside (Pedestal Mount) ........................................................ Outside ....................................................................................
INSIDE LIGHTS BULB Dome Light Wagon Rear Compartment and Base ..................................... 562 Dome/Reading Light Front ....................................................................................... 168 Rear ......................................................................................... 194 Heater & A/C Control .............................................................. 74 High-Beam Indicator ................................................................
Service & Appearance Care Engine Specifications VIN Engine Code ..................................................................... Type .......................................................................................... Displacement ........................................................................... Compression Ratio ........,.................... ... ........... ........................ Firing Order .............................................................................
Part 7 Maintenance Schedule T h i s part covers the maintenance Section Introduction . Your required for your Chevrolet A Word About Maintenance ........................................................................... vehicle needs these services to Your Vehicleand theEnvironment................................................................. retain itssafety. dependability and How This Part is Organized ............................................................................ .
Maintenance Schedule Your Vehicle andthe Environment Proper vehiclemaintenance not only helps to keep your vehiclein good A Word About Maintenance working condition, but also helps the We at General Motors want to help you environment. All recommended keep your vehiclein good working condition. But we don’t know exactly maintenance procedures are important. how you’ll driveit. You may drive very Improper vehicle maintenance or the short distances only a fewtimes a week.
inspections that your Chevroletdealer’s service department or another qualified service center should perform. “Section D: Recommended Fluidsand Lubricants” lists some products GM recommends to help keep your vehicle properly maintained. These products, or their equivalents, should be used whether you do thework yourself or have it done. “Section E: Maintenance Record” provides a placefor you to record the maintenance performed on your vehicle.
Maintenance Schedule Schedule I Follow ScheduleI if your vehicle is MAINLY driven underone or more of the following conditions: When most trips are less than 4 miles (6 km). When most trips are less than 10 TO BE SERVICED ITEM See Explanation of Scheduled Maintenance miles (16 ltm) and outside Nom Services following SchedulesI and 11. temperatures remain below freezing. When most trips include extended idling and/or frequent low-speed I 2 ILubrication Chassis I operation, as in stop-and-go traffic.
The services shownon this chart up to60,000 miles (100 000 km)should be performed after 60,000 miles at the same intervals. MILES (000) 3 1 6 1 9 112115118121 124127130133136139142145148151 154157160 KILOMETERS (000) . I 1 . 11 . 1 I I 1.1 1.1 I I I I I 1 . 11 . 1 I I . I I 1.1 I I I I 1.1 ' I I 1.1 I I .
Maintenance Schedule Schedule /I Follow ScheduleI1 ONLY if noneof the driving conditions specified in Schedule I apply. WHEN TO PERFORM TEM TO BE SERVICED Explanation of Scheduled Maintenance No' SeeServices following SchedulesI and 11. Miles (kilometers)or Months (zuhichever occursfirst). 2 I Chassis Lubrication I Everv 7.500 Miles (12 500 lun) or 12 Months. 12 I I * = An Emission Control Service. t = The U S .
r I The servicesshown on this chart up to 60,000 miles (1 00 000 km) should be performed after 60,000 miles at the same intervals. MILES (000) 5 17.5 I 10 I 15 I 20 (22.51 25 I 30 I 35137.5140 KILOMETERS (000) 8 112.5116 I 25 I 32137.51 40 I 50 I 56 162.5164 I 45 I 50 152.51 55 I 60 I 75183.5187.5(92 I 100 .
Maintenance Schedule Explanation of Scheduled Maintenance Services Following are explanations of the services listed in ScheduleI and Schedule 11. The proper fluids and lubricants to use are listed in Section D. Make sure whoever servicesyour vehicle uses these. All parts should be replacedand all necessaryrepairs done before you or anyone else drivesthe vehicle. ITEM NO. SERVICE 4. Engine Accessory DriveBelt(s) Inspection * - Inspect the belt (s) for cracks, fraying, wear and proper tension.
8. Spark Plug Replacement (P.2L 6, Transaxle Service- For manual Code 4 engine only)* - Replace transaxles, fluid doesn’t require spark plugswith the proper type. changing. SeePeriodic Maintenance See Replacement Parts in the Inspections in the Index. For Index. automatic transaxles, changeboth the fluid and filter every15,000 miles 9. Spark Plug WireInspection*t (25 000 km)if the vehicle is mainly Inspect forburns, cracks or other driven under one or moreof these damage.
Maintenance Schedule Section B: Owner Checks and Services h t e d below are owner checks and services which should be performed at the intervals specified to help ensure the safety, lependability and emission control performance of your vehicle. 3e sure any necessary repairsare completed at once. Whenever any fluidsor lubricants are added to your vehicle, makesure hey are the proper ones, as shown in Section D.
CHECK OR SERVICE WHAT TO DO TireInflation Check tire inflation. Make sure they are inflated to the pressures specified on theTire-Loading Information label located onthe rear edge of the driver’s door. See Tires in the Index for further details. Cassette Deck Clean cassette deck. Cleaning should be done every15 hours of tape play. SeeAudio Systems in the Index for further details. At Least Twice a Year CHECK WHAT TO DO OR SERVICE Hydraulic Clutch Check the fluid level in the clutch reservoir.
Maintenance Schedule At Leasf Once a Year - CHECK OR SERVICE Key Lock Cylinders Body Lubrication - Starter Switch Bralte-Transaxle Shift Interlock BTSI (Automatic Transaxle) z A WHAT TO DO Lubricate the key lock cylinders withthe lubricant specified in Section D. Lubricate all bodydoor hinges, rear compartment or tailgate. Also lubricate all hinges and latches, including those for thehood, glove boxdoor, console door and any folding seat hardware. Section D tells vou what to use.
I CHECK OR SERVICE WHAT TO DO ~~ Steering Column Lock Parking Brake and Automatic Transaxle P (Park) Mechanism Check ~~ ~ While parked, and with the parking brake set, try to turn the key to LOCK in each shift lever position. With an automatic transaxle, the key should turn toLOCK only when the shift lever is in P (Park). With a manual transaxle, the key should turn to LOCK only when the shift lever is inR (Reverse).
Maintenance Schedule Section C: Periodic Maintenance Inspections Listed below are inspections and services which should be performed at least twice a year (for instance, eachspring and fall). You should let JourGM dealer’s service department or other qualified service center do these jobs. Make sure any necessary repairs are completed at once.
Maintenance Schedule Section D: Recommended Fluids and Lubricants VOTE: Fluids and lubricants identified below by name, part number or specificationmay be obtained from your GM dealer. ~~ ~ FLUID/LUBRICANT USAGE ~~~~ Engine Oil API serviceSH or SG Energy ConservingI1 oils of the proper viscosity. The“SH” or “SG” designation may be shown alone or in combination with others, such as “SH/CD,” “SH,SG,CD,”“SG/CD,” etc.
Maintenance Schedule USAGE FLUlD/LUBRICANT Automatic Transaxle Shift Linkage Engine oil. Clutch Linkage Pivot Points Engine oil. Chassis Lubrication Chassis lubricant (GM Part No. 1052497 or equivalent) or lubricant meeting requirements of NLGI Grade 2, Category LB or GC-LB. Windshield Washer GM Optikleen@Washer Solvent (GMPart No. 1051515) or equivalent. Solvent Hood Latch Assembly a. Pivots and Spring a. Engine oil. Anchor b. Release Pawl b. Chassis lubricant (GM Part No.
Section E: Maintenance Record After the scheduled services are performed, recordthe date,odometer reading and who performedthe service in thecolumns indicated. When completingthe Maintenance Performed column, insert the numbers from the Schedule I or Schedule I1 maintenance charts which correspond to themaintenance performed. Also,you should retain all maintenance receipts. Your owner information portfolio is a convenient place to store them.
Maintenance Schedule DATE 220 ODOMETER READING SERVICED BY MA/WENA/UC€PERFORMED
Part 8 Customer Assistance Information H e r e you will find out how to contact Chevrolet if you need assistance. This partalso tells you how to obtain service publications and howto report any safety Customer Satisfaction Procedure ........................................................................... 222 Customer Assistance for Hearing or Speech Impaired .........................................223 BBB Auto Line-Alternative Dispute Resolution Program....................................
Customer Assistance Information Customer Sati#action Procedure Your satisfaction and goodwill are important to your dealer and Chevrolet.
Refer to your Warranty and Owner Assistance Information booklet for addresses of Canadian and GM Overseas offices. When contacting Chevrolet, please remember that your concern w l ilikely be resolved in thedealership, using the dealership's facilities, equipment and personnel. That is why we suggest you follow Step Onefirst if you have a concern.
Customer Assistance Information unsuccessful, an informal hearingwill be scheduled where eligiblecustomers may present their case to an impartial third-party arbitrator. The arbitrator will make a decision which you may accept or reject. If you accept the decision, GM will be bound by that decision. The entire dispute resolution procedure should ordinarily take about forty days fromthe time you file a claimuntil a decisionis made.
24-Hour Roadside Assistance Number 4 REPORTING SAFETY DEFECTS TO GENERAL MOTORS: In addition to notlfying NHTSA (or Transport Canada) in a situation like this, we certainly hope~ 0 ~ notify ~ 1 1us. Please call us at 1-800-222-1020, or write: Chevrolet Motor Division Chevrolet Customer Assistance Center P. 0.Box 7047 Troy, MI 48007-7047 In Canada, please callus at 1-800-263-3777 (English) or 1-800-263-7854 (French).
Customer Assistance Information Chevrolet/Geo offers Courtesy Transportation for customers needing warranty service. Courtesy Transportation will be offeredin conjunction withthe coverage provided by the Bumper-to-Bumper New Vehicle Limited Warrantyto retail purchasersof 1994 Chevrolet/Geo passenger carand light duty trucks. Courtesy Transportation includes: One way shuttle ride for any warranty repair. Up to $30 maximum daily vehicle rental allowance for any overnight warranty repairup to 5 days.
Service Publications Information on how to obtain Product Service Publications and Indexes as described below is applicable only in thc fifty U.S.states (and the District of Columbia) and only forcars and light trucks with GVWR less than 10,000 pounds ( 4 536 kg). In Canada, information pertaining to Product Service Bulletinsand Indexes can be obtained by writing to: General Motors of Canada Limited Service Publications Department 1908 Colonel Sam Dr.
Customer Assistance Information over yet, we’ll send you the most recently published issue. Check the ordering form for indexes for earlier model years. Cut out theordering form, fillit out, and mail it in. We will then see to it that an index is mailed to you. There is no charge for indexes for the 1990-1994 model years.
1994 CHEVROLET SERVICE PUBLICATIONS ORDERING INFORMATION The folloWng publications covering the operation and servicing of p u r vehicle canbe purchased by filling out the Service Publications Order Form in thisbook and mailing it with your check, money order or credit card information toHelm, Incorporated (address listed below).
CHEVROLET SERVICE PUBLICATIONS ORDER FORM MAIL TO: NOTE: Please complete form below (Print or Type) and Post Office Box 07130, Detroit, Michigan 48207 ORDER TOLL FREE 1-800-782-4356 (Monday-Friday 8:OO A.M.-6:00 P.M. EST) PUBLICATION FORM NUMBER* VEHICLE MODEL DESCRIPTION ITEM NAME YEAR ST-366-94 Service Manual Chevrolet Cavalier 1994 10233995 Owner's Manual In-Portfolio Chevrolet Cavalier 1994 Owner's Manual Without-Portfolio Chevrolet Cavalier !:E$* QTY.
.I
Index Care of Audio Systems.................. 104 Radio Reception.Understanding.. 104 Setting the Clock ............................. 97 Automatic Door Loclts ...................... 44 Automatic Lap-Shoulder Belt (see Safety Belts) Automatic Transaxle.......................... 53 Adding Fluid................... 168.198.199 Brake-Transaxle Shift Interlock.......................... .54.60 Checking Fluid.............................. 167 Shifting ............................................
Checking Things Underthe Hood .. 157 Ventilation ....................................... 95 Chemical Paint Spotting.................. 193 Clock. Setting the ............................... 97 Child Restraints.................................. 31 Clutch, Hydraulic Children and Safety Belts.............30.38 170,199 Adding Fluid........................... Checking Fluid.............................. 170 Cigarette Lighter................................ 75 Circuit Breakers& Fuses ................
Gage ................................................. 84 Engine CoolantTemperature Warning In Foreign Countries ..................... 156 F a b r i c Cleaning Gage (see Coolant) 154 Requirements................................. (see Appearance Care) Engine Exhaust Dangerous Gas in .......... 45.47.61. 124 Fan Warnings....... 129.130.137.138.159 Fuse Usage ....................................... 196 Filling the Fuel Tank................. 156.198 Fuses & Circuit Breakers................
Heater. Engine Block.................. 52.165 High Beams........................................ 66 Jack. Tire ........................................ 146 Highway Hypnosis........................... 121 Jump Starting ................................... 128 Hill and Mountain Roads ................ 122 Hood Release ................................... 158 K e y Release Button .......................... 51 Warning. Overheated Engine........ 159 Keys ....................................................42 Horn .
Octane Requirements (see Fuel Requirements) Odometer & Speedometer ................. 82 Oil. Engine ....................................... 162 Pressure Gage.................................. 90 Quality ........................................... 163 Starburst ........................................ 163 Thickness ....................................... 163 Used Oil ......................................... 165 When to Add ................................. 162 When to Change ............................
Index a mI Torn ................................................. 40 Twisted ............................................ 24 Vehicles First Sold in Canada.........20 Warning Light............................. 17.20 Why You Should Wear Safety Belts ............................................... 18 Safety Defects. Reporting ................224 Scheduled Maintenance Services.... 205 Seat Belts (see Safety Belts) Seat Controls Easy-Entry ....................................... 15 Head Restraints ............
. Liftgate Ajar..................................... 88 85 Low Coolant .................................... Vehicle Damage Warnings .................. 8 hnsaxle. Automatic .................................................... 89 Oil Vehicle Identification Number (see Automatic Transaxle) 194 Safety Belt .................................. 17. 20 ............................................. (VIN) rransaxle. Manual Upshift Indicator ........................ 57. 87 Vehicle Loading ..........................
Service Station Information Windshield Washer Fluid See Page 173 Battery The Delco Freedom03battery needs no water. See Page 176 Transaxle Fluid Automatic: See Page 167 Manual: See Page 169 Hood Release See Page 158 Cooling System Check and add coolant at the coolant recovery or coolant surge tank. The fluid should be at or slightly above the FULL COLD mark. See Page 170 Engine Oil See Page 162 Cold Tire Pressure See Tire-LoadingInformation label on the driver’s door.
WE SUPPORT VOLUNTARY TECHNICIAN CERTIFICATION THROUGH National Institute for AUTOMOTIVE SERVICE EXCELLENCE ..
I994 Owner’s Manual Supplement This information replaces the air conditioning refrigerant specifications on page 198 of the 1994 Chevrolet Cavalier Owner’s Manual. If your Cavalier has air conditioning,the system could be filled with R-12or R-134a refrigerant. These refrigerants are not interchangeable. If service is required, please referto therefrigerant charge label underthe hood for refrigerant charge typeand quantity.
