Owner's Manual
Finish
Damage
Any stone chips, fractures or deep
scratches in the finish should be
repaired right away. Bare metal will
corrode quickly and may develop into a
major repair expense.
Minor chips and scratches can be
repaired with touch-up materials
available from your dealer or other
service outlets. Larger areas of finish
damage can be corrected in your
dealer's body and paint shop.
Underbody
Mahtenanm
.
:
Chemicals used for ice and snow
removal and dust control can collect on
the underbody.
If
these are not
removed, accelerated corrosion (rust)
can occur on the underbody parts such
as fuel lines, frame,
floor
pan, and
exhaust system even though they have
corrosion protection.
At least every spring, flush these
materials from the underbody with
plain water. Clean any areas where mud
and other debris can collect.
Dirt
packed in closed areas of the frame
should be loosened before being flushed.
Your dealer or
an
underbody vehicle
washing system can do this for you.
Chemical Paint
Spotting
Some weather and atmospheric
conditions can create
a
chemical fallout.
Airborne pollutants can fall upon
and
attack painted surfaces on
your
vehicle.
This damage can take
two
forms:
blotchy, ringlet-shaped discolorations,
and small irregular dark spots etched
into the paint surface.
Although no defect in the paint job
causes this, Chevrolet will repair, at no
charge to the owner, the surfaces
of
new vehicles damaged by this fallout
condition within 12 months or 12,000
miles
(20
000
km)
of purchase,
whichever comes first.