Owner's Manual

Service and Appearance Care
2. Pull the lens out.
3. Push the bulb in, turn it
counterclockwise, then pull it out.
4. Reverse the steps with a new bulb. To
prevent water from getting inside the
lens, make sure the lens seal is
properly positioned.
. . .I98
lack-up Light
I'ou can reach the back-up lights by
emoving the license plate and reaching
hrough the opening.
. Push the tab on the socket and turn it
counterclockwise.
!. Push the bulb in, turn it
counterclockwise, then pull it out.
1. Reverse the steps with a new bulb.