Manualshelf

Owner's Manual

ManualsBrandsChevrolet ManualsAutomobileChevrolet 1994 Chevrolet Suburban
141142143144145146147148149150
The air flow
can
be blended between the two positions. To blend between
positions press the side
of
the button showing the area where you would
like
more air flow. The system
will
automatically begin to blend toward the
position chosen.
To
stop the system between positions, just press the
SAME
side of the button again.
Right
Button
Defrost
(Top)
:
This setting operates
the
defroster. Air comes out near
the
bottom
of
the windshield and at your front side windows. Use this setting,
along with a heat setting, when you get fog or ice on the windshield.
Heater
(Bottom)
:
Press the bottom of this button and air comes out near
the floor. This setting, along
with
a
heat
setting, is best for passenger
comfort in cold weather.
The air flow can be blended between the two positions.
To
blend between
positions press the side of the button showing the area where
you
would like
more air
flow.
The system will automatically begin to blend toward the
position chosen. To stop the system between positions, just press
the
SAME
side
of
the button
again.
A/C
Button
Press the button marked
A/C
to
turn
your air conditioner
on
and off. The
A/C
symbol
will
light
on
your display and air
will
come
out
of your
instrument panel vents. The fan will automatically be set on
LOW
.
When you press the
A/C
button to
turn
the air conditioner
off,
the system
will operate in the vent mode. When you turn the air conditioner back
on,
the system
will
operate
in
the mode that
you
last selected unless the
OFF
button
was
pressed.
MAX
Button
If you press the
MAX
button, the air
in
your vehicle will be recirculated.
With the air conditioner on,
MAX
will give you
maximum cooling.
It can
also be used
in
all modes to help keep dust out of your vehicle. When
MAX
is selected,
REC
will
light on your display.
If your air conditioner develops high system pressure, it will automatically
go into the
MAX
mode and
REC
will light
on
your display. The
A/C
system will remain
in
the
MAX
mode, even
if
you press the
MAX
button,
until
system pressure returns to a normal level.
3-7