Owner`s manual
Clock
To
set the clock, just:
Push
SET.
Within
5
seconds, push and hold
SCAN
until
the
correct hour appears.
Press and hold
SEEK
until the correct minute appears.
To display the clock with the ignition off, push the upper knob. The time
will be displayed for
a
few seconds.
To
Way
A
Cassette
Your tape player is built to work best with tapes that are
30
to
45
minutes
long
on
each side. Tapes longer than that are
so
thin
they
may not work well
in
this player.
To
play a cassette tape:
Have the radio
on.
Insert the tape squarely through the tape door.
The
longer side
with
the
tape visible goes
in
first. If
you
hear nothing
or
hear just garbled sound, it may
not
be
in
squarely. Push
STOP-EJECT
to
remove the tape and start over.
Once the tape is playing, use the upper and lower knobs for volume and
balance, just as you
do
for radio. The arrows show which side of the tape is
playing.
0
To
go
forward
to
another part of the tape, push the button with an
arrow pointing toward the lighted arrow. To stop the tape, push the
STOP-E JECT
button lightly.
To
go
backward,
push the button with an arrow pointing away from
the
lighted arrow.
To
stop the tape, push the
STOP-EJECT
button
lightly.
To
go from one side of the tape
to
the other, push
in
the upper knob
on
To
remove or stop the tape, push
STOP-EJECT.
your radio.
3-14