Owner`s manual
Clock
To
set the clock, just:
Press
SET. (SET
appears
in
the
VF
display for
a
few seconds.)
Within
5
seconds, push and hold
SCAN
until
the
correct hour appears.
Press and hold
SEEK
until
the correct minute appears.
To
display the clock
with
the ignition off, push the upper knob. The time
will
be displayed for a few seconds.
To
Play
A
Cassette
Your tape player is built to work best
with
tapes that are
30
to
45
minutes
long on each side. Tapes longer
than
that are so
thin
they
may not work well
in
this
player.
To play a cassette tape:
Have the radio on.
Insert the tape squarely through the tape door.
The longer side
with
the tape visible
goes
in
first. If you hear nothing or
hear just garbled sound,
it
may not be
in
squarely.
Push
STOP-EJECT
to remove the tape and start over.
Once the tape is playing, use the upper and lower knobs for volume and
balance, just as
you
do for radio. The arrows show which side of the tape is
playing.
0
To
go
forward
to another part of the
tape,
push
b.
0
To
go
backward,
push
4.
To
stop the tape, push the other button
lightly.
your radio.
To remove or stop the tape, push
STOP-EJECT.
0
To
go from one side of the tape to the other, push
in
the
upper knob on
APS (Automatic Program Search)
Press this button to activate the automatic program search. When the
b
button is pressed, the tape will rapidly advance to the beginning of the next
selection. When
the
4
button is pressed, the tape
will
rapidly reverse to the
beginning of the current selection.
Press
STOP-E JECT
to remove the cassette and start the radio.
3-17