Owner`s manual

Lap Belt
If your vehicle has front and rear bench seats, someone can sit in the center
positions.
When you sit in a
center seating
position, you have a
lap safety belt, which
has no retractor.
To
make the belt longer,
tilt the latch plate and
pull it along the belt.
To make the belt
shorter, pull its free
end as shown
until the
belt is snug.
Buckle, position and release
it the same way as the lap part of a
lap-shoulder belt. If the belt isn’t long enough, see “Safety Belt Extender”
at the end of this section.
Make sure the release button on the buckle is positioned
so you would be
able to unbuckle the safety belt quickly
if you ever had to.
1-23