Owner's Manual

5.
Using the wrench, remove the two lower bolts (A)
from the lock pillar bracket on each side.
6.
Remove the bolt
(B)
from the bottom flange of each
lock pillar bracket.
7.
Then remove the two upper bolts
(C)
from the
receiver bracket on each side.
8.
Slide both lock pillar brackets down and forward
from the receiver brackets.
You
may need to lift the
hardtop slightly to remove the brackets.
9.
Disconnect both wire connectors located behind the
lock pillar brackets. These
are
the rear window
defogger wires.
2-66