Owner's Manual
Steering
Power Steering
If you lose power steering assist because the engine
stops or the system is not functioning, you can steer but
it will take much more effort.
Steering Tips
Driving
qn
Curves
It’s important to take curves at a reasonable speed.
A lot
of
the “driver lost control” accidents mentioned on
the news happen on curves. Here’s why:
Experienced driver or beginner, each
of
us
is subject to
the same laws
of
physics when driving on curves. The
traction
of
the tires against the road surface makes it
possible for the vehicle to change its path when you
turn
the front wheels. If there’s no traction, inertia will keep
the vehicle going in the same direction.
If
you’ve ever
tried to steer a vehicle on wet ice, you’ll understand this.
The traction you can get in a curve depends on the
condition of your tires and the road surface, the angle at
which the curve is banked, and your speed. While you’re
in a curve, speed is the one factor you can control.
Suppose you’re steering through
a
sharp curve. Then you
suddenly accelerate. Both control systems
--
steering
and
acceleration
--
have to do their work where the tires meet
the road. Unless your
ASR
system is on, adding the
sudden acceleration can demand too much
of
those
places. You can lose control.
What should you do if this ever happens? Ease up on the
accelerator pedal, steer the vehicle the way you want it
to go, and slow down.
Speed limit signs near curves warn that you should
adjust your speed.
Of
course, the posted speeds are
based on good weather and road conditions. Under less
favorable conditions you’ll want to go slower.
If
you need to reduce your speed as you approach a
curve, do it before you enter the curve, while your front
wheels are straight ahead.
Try
to adjust your speed
so
you can “drive” through the
curve. Maintain a reasonable, steady speed. Wait to
accelerate until you are out
of
the curve, and then
accelerate gently into the straightaway.