Owner's Manual
6.
To
remove
a
socket,
press the tab, turn the
socket counterclockwise
and pull it out.
7.
Pull the bulb out.
Do
not
twist
it.
8.
Push the new bulb into the socket.
9.
Replace the socket
in
the
assembly.
10.
Tighten the socket (both kinds) by turning
it
clockwise.
11.
Install
the
assembly
and
the
two lower wing nuts.
12.
Replace
the
carpeting.
13. Replace the upper (convenience net) wing
nut,
if
equipped.
14.
Replace the convenience net,
if
equipped.
Back-up Lamp
1.
Open
the
trunk. The back-up lamp bulbs are in the
rear
of
the trunk lid.
2.
Press the tab on the
socket, turn the socket
counterclockwise and
pull it out.
3.
To
remove the bulb, pull
it
out
of
the socket.
Do
not
twist
the
bulb.
4.
Push the new bulb into the socket.
5.
Reverse Steps 1-3 to replace the socket.
6-35