Owner's Manual

Setting Cruise Control
Resuming a Set Speed
-
11 you leave your cruise control switch
you’re not using cruise, you might hit a button
and
go into cruise when you don’t want to. You
could be startled and even lose control. Keep
the cruise control switch
OFF until you want
to use it.
1. Move the cruise control switch to ON.
2. Get up to the speed you want.
I
Suppose you set your cruise control at a desired speed
and then you apply the brake. This, of course, shuts off
the cruise control. But you don’t need to reset it.
Once you’re going about
25 mph (40 krdh) or more,
you can move the cruise
control switch from
ON to
R/A (Resume/Accelerate)
for about half a second.
You’ll go right back up
to your chosen speed and
stay there.
Increasing Speed While Using Cruise Control
There are two ways to go to a higher speed. Here’s
the first:
1. Use the accelerator pedal to get to the higher speed.
2. Push in the SET button, then release the button
and the accelerator pedal. You’ll
now cruise at the
higher speed.
2-28