Owner's Manual
Setting Cruise Control
A
CAUTION:
If
you leave your cruise control switch on when
you're not using cruise, you might hit
a
button
and
go
into cruise when you don't want to. You
could be startled and even lose control. Keep the
cruise control switch
OFF
until you want to use it.
1.
Move the cruise control
3.
Push in the
SET
button at the end of the lever and
release
it.
4.
Take your
foot
off the accelerator pedal.
Resuming a Set Speed
Suppose
you
set your cruise control at
a
desired speed
and then you apply the brake. This, of course, shuts off
the cruise control. But you don't need to reset
it.
2.
Get
up
to the speed
you
want.
switch to
ON.
Once you're going about
25
mph
(40
kdh) or more,
you
can move the cruise
control switch from
ON
to
WA
(Resume/Accelerate)
for about half
a
second.
-*:<'-;ir$.
:::;.
&;>'
.'
'f
I
,
.
.
,
<,
<.
,
,,.,
You'll go right back up
to
your chosen speed and stay there.
Remember, if
you
hold the switch at R/A longer than
half
a
second, the vehicle will keep going faster until
you
release the switch or apply the brake. You could be
startled and even lose control.
So
unless you want
to
go
faster, don't hold the switch at R/A.
2-33