Owner`s manual
~~ ~
~ ~~~ ~
Playing a Cassette Tape
Your tape player is built to work best with tapes that are
30 to
45
minutes long on each side. Tapes longer than
that are
so
thin they may not work well in this player.
If
a tape is inserted when the ignition is on but the radio is
off,
the tape will begin playing. A tape symbol is shown
in the center of the graphic display whenever a tape is
inserted. When a tape is active, the tape symbol will be
accompanied by a direction arrow.
While the tape is playing, use the VOL, AUTO TONE,
BAL, FADE, BASS and TREB controls just as you
do for the radio. Other controls may have different
functions when a tape is inserted. The display will
show the tape symbol and an arrow to show which
side
of
the tape is playing.
If you hear nothing or hear just a garbled sound, it may
not be in squarely. Press EJECT to remove the tape and
start over.
The player is able to detect a tight or broken tape, and
will eject the tape. The radio will go back to playing the
last station selected.
The player automatically senses the cassette for metal or
Cr02 and sets the pre-emphasis. Anytime a tape is
inserted, the top side is selected to play first.
~~~~
PREV
(1):
Press this button or the SEEK left arrow to
search for the previous selection on the tape
if
the
current selection has been playing for less than eight
seconds.
If
the PREV button is pressed and the current
selection has been playing for more than eight seconds,
it will go to the beginning of the current selection. Your
tape must have at least three seconds of silence between
each selection for PREV or SEEK to work. The tape
direction arrow blinks during PREV or SEEK operation.
The sound will mute during PREV or SEEK operation.
Press this button or one of the SEEK arrows again to
return to normal play.
PROG
(2):
Press this button to play the other side
of
the tape.
NEXT
(3):
Press this button or the SEEK right arrow
to search for the next selection on the tape. If you hold
the button or press it more than once, the player will
continue moving forward through the tape. Your tape
must have at least three seconds of silence between
each selection for NEXT or SEEK to work. The tape
direction arrow blinks during NEXT or SEEK operation.
The sound will mute during NEXT or SEEK operation.
Press
this
button or one of the SEEK arrows again to
return to normal play.
REV
(4):
Press this button to reverse the tape rapidly.
Press
it
again to return to playing speed. The radio will
play the last-selected station while the tape reverses.
3-12