Owner`s manual
3.
Remove the lamp assembly from the vehicle by
pulling forward. Use care not to scratch the vehicle
with the lamp or the lamp with the fender.
harness and twist the bulb less than one-quarter
of
a
turn to the left and remove. Gently wiggle the bulb
from the socket.
4.
For the high
or
low-beam bulbs, unclip the wiring
5.
For the turn signal bulb, press the tab on the white
bulb socket and twist it less than one-quarter
of
a
turn to the left.
6.
Reconnect the wiring harness to the bulb or
lamp assembly.
lining up the lamp to the mounting balls.
7.
Replace the lamp to its original position by carefully
8.
Press down on the two latches. Replace the splash
shield by pushing down on the retainer.
6-31