Owner's Manual

Open the latch and close the T-top. Check to see if

there are

any

gaps showing, Unlatch the T-top and

adjust the sunshade as required.

4. Once the sunshade is installed properly,

you

can

stick the Velcro@ buttons on the glass for a proper fit

every time you install the sunshades.

do this, first

remove

the

T-top with the sunshade installed and

place it upside down on

table or bench. Take care

not to scratch the glass.

Pull

the

sunshade back a little and remove the backing

paper

from

the Velcro buttons. Push the sunshade

back into place, sticking the Velcro to the glass.

Install the T-top, close the latch and lock the

T-top. Repeat the above steps

for

the

passenger’s

side sunshade.

1-64