Owner's Manual

3.
4.
Fill with the proper DEX-COOL@ coolant mixture.
Continue
to fill the radiator up to the base of the
filler neck.
5.
6.
Rinse or wipe the spilled coolant from the engine
and compartment.
Start the engine and allow it to
run in idle for
approximately
four minutes. By this time, the
coolant level inside the radiator will be lower.
Add
more of the proper mixture through the filler neck
until the level reaches the base
of the filler neck.
7. Shut the engine off and replace the pressure cap. Be
sure the arrows
on the cap line up like this.
5-25