Owner's Manual

Rear Lamps
To change any rear bulb, you have to remove the
entire housing.
1. Remove the trim panel from the side that you are
replacing the bulb.
2. Pull the carpet back.
4. Pull the assembly off from the outside.
5. To remove a socket with a tab, press the tab and turn
the socket to the left (counterclockwise).
To remove
a socket without a tab, turn the socket to the left
(counterclockwise).
6. To remove the bulb, pull the bulb from the socket.
7. Reverse the steps with a new bulb.
3. Remove the wing nuts.
6-40