Specifications

To install the side window:

1. Make sure the plastic clip at the top front corner of

the canvas top is unfastened.

2. Then start by zipping the zipper about 3 inches

(8 cm), to hold the window in place. When zipping,

place the rear bottom corner of the window inside the

rear part of the vehicle body to help support the

window while you engage the zipper end.

3. Install the plastic strip into the window channel

before completely zipping the window. There is

a locating pin in the front upper corner to assist in

aligning the window.

4. Pull rearward on the rear edge of the window to

make sure the window is secure and ﬁnish zipping

the window.

5. After completing installation, make sure that the

front and bottom ends are securely hooked and

the rear top end of the window is under the

canvas top.

6. Refasten the plastic clip at the top front corner

of the side window. Restore the tension to the

canvas top support arms.

2-42