Specifications

2. Lift the top tab on the cover to remove the filter
cover.
3. Install the lower filter by dropping it down into the slot.
The grooves on the two filters must be lined up with
each other as well as with the ventilation housing in
order to install the filters properly. The tabs on the
filters should face outward towards you and should
be at the top of the filters. The arrows on the filters
should point to the driver’s side of the vehicle.
4. Then line up the grooves of the second filter with the
lower one and slide it in on top of the lower one.
5. Reverse the steps to remove the air filters and
then install new ones.
Once you remove the filter, if you choose not to replace
it, it will not damage your vehicle. However, the air
will no longer be filtered.
3-23