Specifications

See

Engine Compartment Overview on page 5-12

for

more information on location.

Turn off the engine and give the oil several minutes to

drain back into the oil pan. If you don’t, the oil

dipstick might not show the actual level.

Pull out the dipstick and clean it with a paper towel or

cloth, then push it back in all the way. Remove it again,

keeping the tip down, and check the level.

When to Add Engine Oil

If the oil is at or below the hole at the tip of the dipstick,

then you’ll need to add up to two quarts of oil. But

you must use the right kind. This part explains what kind

of oil to use. For engine oil crankcase capacity, see

Capacities and Speciﬁcations on page 5-93

Notice:

Don’t add too much oil. If your engine has

so much oil that the oil level gets above the

upper mark that shows the proper operating range,

your engine could be damaged.

The engine oil ﬁll cap is

located in the front of the

engine compartment.

See

Engine Compartment

Overview on page 5-12

for more information

on location.

Be sure to ﬁll it enough to put the level near the upper

hole in the dipstick. Push the dipstick all the way

back in when you’re through.

2.0L Engine

2.5L Engine

5-17