Specifications

Lap Belt
When you sit in the center seating position, you have
a lap safety belt, which has no retractor. The word
“CENTER” is on both the buckle and latch plate.
Also, the center buckle and latch plate are a different
color than the two outboard buckles and latch plates.
To make the belt longer, tilt the latch plate and pull
it along the belt.
To make the belt shorter, pull its free end as shown
until the belt is snug.
Buckle, position and release it the same way as the
lap part of a lap-shoulder belt. If the belt isn’t long
enough, see
Safety Belt Extender on page 1-30 .
Make sure the release button on the buckle is positioned
so you would be able to unbuckle the safety belt
quickly if you ever had to.
1-27