Specifications

Windshield Wipers
Use this lever located on the right side of the steering
wheel to operate the windshield wipers.
9(Off): Move the lever to this position to turn off the
windshield wipers.
x (Intermittent): Move the lever to this position to
choose a delayed wiping cycle. Turn the intermittent
adjust band down for a longer delay or up for a shorter
delay. The wiper speed can only be manually adjusted
when the lever is in this position.
& (Speed Sensitive Wipers): Move the lever to this
position for speed sensitive operation. When you
select this position, the delay will change with your
vehicle’s speed. The wiper speed will increase as you
go faster and decrease as you go slower.
6 (Low Speed): Move the lever up to the first
setting past intermittent, for steady wiping at low speed.
1 (High Speed): Move the lever up to the second
setting past intermittent, for wiping at high speed.
8 (Mist): Move the lever all the way down to this
position for a single wiping cycle. Hold it there until the
windshield wipers start; then let go. The windshield
wipers will stop after one wipe. If you want more wipes,
hold the lever down longer.
Remember that damaged wiper blades may prevent you
from seeing well enough to drive safely. To avoid
damage, be sure to clear ice and snow from the wiper
blades before using them.
If the wiper blades are frozen to the windshield, carefully
loosen or thaw them. If your blades do become
damaged, get new blades or blade inserts.
Heavy snow or ice can overload your wiper motor.
A circuit breaker will stop the motor until it cools. Clear
away snow or ice to prevent an overload. If the
motor gets stuck turn the wipers off, clear away the
snow or ice, and then turn the wipers back on.
As an added safety feature, if the wipers are on for
more than thirty seconds, the vehicle’s headlamps will
turn on automatically. They will turn off when the wipers
are turned off.
3-9