Specifications

To insert multiple CDs, do the following:
1. Turn the ignition on.
2. Press and hold the LOAD button for two seconds.
A beep sound and the indicator light, located to the
right of the slot, begins to flash and MULTI LOAD #
displays.
3. Once the light stops flashing and turns green,
INSERT CD # displays, load a CD. Insert the
CD partway into the slot, label side up. The
player pulls the CD in.
Once the CD is loaded, the indicator light begins
flashing again. Once the light stops flashing
and turns green, you can load another CD.
The CD player takes up to six CDs. Do not
try to load more than six.
To load more than one CD but less than six, complete
Steps 1 through 3. When finished loading CDs,
press the LOAD button to cancel the loading function.
The radio begins to play the last CD loaded.
If more than one CD has been loaded, a number for
each CD displays.
Playing a Specific Loaded CD
For every CD loaded, a number displays. To play a
specific CD, first press the CD AUX button (if not already
in CD mode), then press the numbered pushbutton
that corresponds to the CD. A small bar appears under
the CD number that is playing and the track number
displays.
CD
Z (Eject): Press to eject CD(s).
To eject the CD that is currently playing, press and
release this button.
To eject multiple CDs, do the following:
1. Press and hold the
Z button for five seconds.
A beep sounds and the indicator light, located to
the right of the slot, begins to flash and EJECT ALL
displays.
2. Once the light stops flashing, REMOVE CD #
displays. The CD ejects and can be removed.
Once the CD is removed, the indicator light begins
flashing again and another CD ejects.
To stop ejecting the CDs, press the LOAD or the
eject button.
3-60