Specifications

Storing a Flat or Spare Tire and
Tools (Sedan SS)
{CAUTION:
Storing a jack, a tire, or other equipment in the
passenger compartment of the vehicle could
cause injury. In a sudden stop or collision,
loose equipment could strike someone.
Store all these in the proper place.
Storing the Flat Tire and Tools
To store the flat tire and jack in the compact spare tire
compartment, do the following:
1. Open the trunk. See Trunk (Sedan) on page 2-15
for more information.
2. Remove the bolt extension (in the yellow sleeve)
from the jack and remove the center cap from
the wheel.
3. Place the jack over the bolt (B) on the floor, making
sure it contacts the bolt as shown.
4. With the yellow cap in place to prevent the wheel
from being scratched, place the bolt extension (A)
onto the bolt (B).
5. Thread the small wing nut (C) until it is at or near
the end of the threads.
6. Reach under the wheel and lift the bolt
extension (A) so that the threaded end of the bolt
passes through the center hole of the wheel.
5-84