2008 Aveo Automobile Owner's Manual

2. Then go to the front of the vehicle and lift up on the

secondary hood release lever, located under the

front center of the hood.

3. Lift the hood and release the hood prop from its

retainer located on the underside of the hood.

4. Securely place the hood prop into the slot on the

inner fender.

Before closing the hood, be sure all the ﬁller caps are

on properly. Then lift the hood to relieve pressure on the

hood prop. Remove the hood prop from the slot in the

inner fender and return the prop to its retainer. Lower the

hood 12 inches (30 cm) above the vehicle and release

it so it fully latches. Check to make sure the hood is

closed and repeat the process if necessary.

5-11