Owner's manual

Attached Extension Cord
1. Turn off the engine.
2. Open the hood and unwrap the electrical cord. The
cord is located in the driver side of the engine
compartment, near the battery.
3. Plug it into a normal, grounded 110-Volt AC outlet.
{
WARNING:
Plugging the cord into an ungrounded outlet
could cause an electrical shock. Also, the wrong
kind of extension cord could overheat and cause
a fire. You could be seriously injured. Plug the
cord into a properly grounded three-prong
110-volt AC outlet. If the cord will not reach,
use a heavy-duty three-prong extension cord
rated for at least 15 amps.
4. Before starting the engine, be sure to unplug and
store the cord as it was before to keep it away from
moving engine parts. If you do not it could be
damaged.
The length of time the heater should remain plugged in
depends on several factors. Ask a dealer/retailer in the
area where you will be parking the vehicle for the best
advice on this.
3-22