Navigation Manual

Navigation Help
Navigation Help: This command
instructs the system to assist
with navigation commands.
Display Commands
Use the following display commands
to set the display mode.
Display [set] day [mode]: Use this
command to set the display to
daytime mode.
Display [set] night [mode]: Use
this command to set the display
to night mode.
Display [set] auto [mode]: Use
this command to set the display to
automatic mode. The system
will change between day and night
mode automatically.
System help: This command
instructs the system to assist with
display commands.
Radio Commands
The following are radio commands
you can access by clearly stating
the commands exactly as they
are written. The commands are only
available when you are in one of
the following audio modes, AM, FM,
or XM™ (if equipped).
Radio: This command instructs the
system to turn the audio system
on.
Radio [band] [select] AM, radio
[band] [select] FM, radio [band]
[select] XM, radio [band] [select]
satellite: These commands
instruct the system to go to either
the AM, FM, or XM (if equipped).
Radio [select] (frequency)
AM, radio [select] (frequency)
FM: These commands instruct the
system to go to a specific
frequency on either AM or FM.
Radio [select] (channel) XM, radio
[select] (channel) satellite: These
commands instruct the system to
go to a specific channel on the
XM™ band (if equipped). The
channel must be a valid channel or
the system will keep the radio at
the current station setting. The
system will pause while searching
for the channel.
Radio help: This command
instructs the system to assist with
radio commands.
CD Commands
The following are CD, MP3, and
DVD commands that can be
accessed by clearly stating the
commands exactly as they
are written.
CD, DVD, Disc: Use this command
to select a CD, DVD, or disc that
is currently loaded.
82 Infotainment System