Supplementary Manual

Black plate (37,1)
Acadia, Acadia Denali, Enclave, and Traverse Navigation System (Includes
Mex) - 2012
Infotainment System 37
To make name selections easier,
the system only highlights the
characters that can follow the last
one entered. For example, if a Z is
entered, a T may not be available
for selection.
If a name does not display after
entry, it may need to be entered
differently or the map DVD disc may
not contain that information. See
Database Coverage Explanations
on page 70 for more information.
Maps
This section includes basic
information about the map
database.
Map Coverage
The maps are stored on a DVD.
Some regions are contained on one
disc; others may need more
than one.
Refer to the “Navigation System
Map Disc” manual for a detailed
explanation of map coverage and
detailed city lists in each region.
This manual is in the map DVD
case when the vehicle is delivered
from the factory.
Installing the DVD Map Disc
Your dealer may have installed the
map DVD. If the map DVD was not
installed, do the following to load it:
Read the following steps completely.
1. Start the vehicle to perform the
map updating. The vehicle must
be in P (Park) to perform this
operation.
2. Press
O to turn the navigation
system on.
3. Press NAV.
4. Press the Insert Map Disc
screen button. The screen opens
to access the map DVD slot.
5. Load the map DVD partway into
the slot. The system pulls it in.
The screen cannot be closed
until a double beep is heard.
Notice: Pressing directly on the
navigation screen may cause
damage. Repairs would not be
covered by the vehicle's warranty.
Do not press directly on the
navigation screen.
6. To close the screen, slightly
push up on the two outer
corners until the screen is in
position. Then push the screen
in by pushing on the four outer
corners until a click is heard.