Technical data

Instruments and controls 105
Transmission display
Type 1
C12E5003A
It indicates the selected gear or
transmission mode.
Type 2
C3E2007A
If your vehicle has a DIC in the
middle of the cluster, the selected
gear or transmission mode display
will be shown on the bottom of the
DIC.
Turn signal
G flashes.
Flashes
The control indicator flashes if a turn
signal or the hazard warning flashers
are activated.
If the green arrows don't flash
when you signal a turn or push
the hazard warning button, check
the fuse and replace any that are not
operating properly.
See Bulb replacement on page 312.
See Fuses on page 316.
See Turn and lane-change signals
on page 129.