Technical data

Instruments and controls 119
Brake System Messages
Press Brake To Start Engine
If the vehicle has the keyless access
system, this message displays if you
try to start the engine without having
the brake pressed.
Press Clutch To Start Engine
If the vehicle has the keyless access
system, this message displays if you
try to start the engine without having
the clutch pressed.
Transmission Messages
Shift To Park
If the vehicle has the keyless access
system, this message displays if the
vehicle is not in P (Park) while the
engine is being turned off.
Trip computer
Trip computer
Trip computer provides the driver
with driving information such as
driving distance for remaining fuel,
average fuel consumption, average
speed and driving time.
Each time you press the MODE
button, the display changes in the
following order:
Driving distance for remaining fuel 
Average speed  Driving time 
Average fuel consumption  Driving
distance for remaining fuel.
To reset average speed or driving
time or average fuel consumption,
press the MODE button for more
than 2 seconds.
To change the distance unit, do the
following:
1. Press the SET button for more
than 2 seconds. The temperature
unit will blink.
2. Press the SET button again. The
distance unit will blink.
3. Press the Q or R button to change
the distance unit (km mile).