Technical data

128 Lighting
To switch from high-beam
headlamps to low-beam, pull the
combination switch lever back
toward you, to its normal position.
Flash-to-pass
C11E2072A
To flash the high-beam headlamps,
pull the combination switch lever
toward you and release it. The lever
will return to its normal position when
you release it.
The high-beam headlamps will stay
on as long as you hold the
combination switch lever toward you.
Headlamp range adjustment
Manual headlamp range
adjustment
2238139
To adapt headlamp range to the
vehicle load to prevent dazzling: turn
knob to required position.
0 = front seats occupied
1 = all seats occupied
2 = all seats occupied and load
compartment laden.
Caution
Always switch the high-beam
headlamps to low-beam when you
approach on coming vehicles or
when other vehicles are ahead.
High-beam headlamps can
temporarily blind other drivers,
which could result in a collision.