Technical data

Infotainment system 209
B. To zoom out/in;
C.To draw map in all directions
2. Route options
A-Navi System offers you optimized
settings of navigation. These settings
are the basis parameters for
calculating the route.
Picture 4.3 Route Options
P43
• Touch "Options" on "Route
Plan" screen and enter "Route
Options" screen(Picture 4.3).
A-Navi System enable user to select
road type and routing style according
to different navigation situations. The
default setting is Quickest Route and
Use of Highway, Use of Ferries and
Allow Toll. You may touch each
parameter to change the mode or
style.
Road type:
- Use of Highway: most use of
highway
- Use of Highway: least use of
highway
- Use of Ferries: most use of
ferries
- Use of Ferries: least use of
ferries
- Avoid Toll Roads
- Avoid Toll Roads: allow toll roads
Routing style:
Fastest Time: calculate a quickest
possible route and you could travel at
or near speed limit. Shortest
Distance: take you to your
destination using the most direct
route possible. Therefore you travel
the minimum kilometers.
4: touch and return "Route Plan"
screen.
OK: touch to confirm route option
settings and return "Route Plan"
screen.
3. Select navigation mode
A-Navi System totally has three
navigation modes as below:
Route Navigation: real-time
navigation among start, waypoint
and destination.
Simulate Navigation: lifelike
simulation of the routing among start,
waypoint and destination. It enables
you to check POI or route information
along the route. Simulate mode is
mostly used when no GPS position is
present.
Free Navigation: real-time
navigation without destination when
GPS position has been fixed.