Technical data

22 Keys, doors and windows
C3D3002A
The ignition control knob can be
turned to four different positions.
The keyless access transmitter
should be inside the vehicle when
trying to turn the ignition control
knob.
1: LOCK(Off)
2: ACC
3: ON
4: START
• Manual transmission: Operate
clutch. Turn the ignition control
knob to the START position,
depressing the clutch pedal and
releasing the Electric Park Brake
switch with brake pedal pressed
when engine is running.
• Automatic transmission: Move
the shift lever to P (Park) or N
(Neutral). The engine will not
start in any other position. To
restart the engine when the
vehicle is already moving, use N
(Neutral) only.
If the vehicle has the keyless
access system, your foot must be
on the brake pedal to start the
engine.
• Diesel engine: Turn the ignition
control knob to the ON position
for preheating until K goes out.
Turn the ignition control knob to the
START position.
When the engine begins cranking, let
go of the ignition control knob, it will
return to the ON position.
If ignition control knob does not turn,
try pushing the knob in and turning
again.
If the transmitter is not in the vehicle
or something is interfering with the
transmitter, the Driver Information
Center (DIC) in the middle of the
cluster will display ELECTRONIC
KEY NOT DETECTED.
Caution
The button on the door handle is
used only for keyless unlocking
function. When you leave vehicle,
lock all doors by pushing the lock
button in the keyless access
transmitter or be sure to check
activating the Keyless locking
function.