Technical data

Vehicle care 305
If the fan is not operating and steam
is visible, perform the following:
1. Turn off engine.
2. Move away from vehicle without
opening the bonnet.
3. Allow engine to cool.
4. When steam is no longer visible,
carefully open bonnet.
5. Consult a repairer as soon as
possible.
If the fan is operating and steam is
not visible, perform the following:
1. Carefully open the bonnet.
2. Idle engine until cool.
3. Check coolant level.
If the fan is operating, but engine
temperature does not fall, perform
the following:
1. Stop the engine.
2. Carefully open the bonnet.
3. Allow the engine to cool.
4. Check the coolant level.
If the coolant level is low, check for
leaks for following components:
1. Radiator.
2. Radiator hoses.
3. Radiator connections.
4. Heater hoses.
5. Heater hose connections.
6. Water pump.
If you find a leak or other damage, or
if the coolant is still leaking, consult a
repairer immediately.
Power steering fluid
C11D6014A
1. Turn the ignition key to
LOCK/OFF and let the engine
compartment cool down.
2. Wipe the cap and the top of the
reservoir clean.
3. Unscrew the cap and pull it
straight up.
4. Wipe the dipstick with a clean
rag.
5. Replace the cap and completely
tighten it.
{Warning
Scalding hot coolant steam could
be blown out under pressure,
which could cause serious injury.
Never remove the coolant reservoir
cap when engine and radiator are
hot.