Technical data

312 Vehicle care
Do not use solvents, gasoline,
kerosene, or paint thinner to clean
wipers. These are harsh and can
damage the blades and painted
surfaces.
Replacing wiper blades
2204062
1. Press and hold the wiper blade
retaining clip.
2. Pull the wiper blade off the wiper
arm.
3. Install a new wiper blade onto the
arm.
Bulb replacement
Bulb replacement
Switch off the ignition and switch off
the relevant switch or close the
doors.
Only hold a new bulb at the base! Do
not touch the bulb glass with bare
hands.
Use only the same bulb type for
replacement.
Replace headlight bulbs from within
the engine compartment.
Note
After driving in heavy rain or
washing, some exterior lamp
lenses could appear frosty.
This condition is caused by the
temperature difference between
the lamp inside and outside.