Technical data

314 Vehicle care
Parking lmaps
C11E6018A
1. Open the bonnet.
2. Remove the headlamp assembly.
3. Remove the headlamp cap.
4. Pull out the bulb holder located
next to the headlamp high bulb.
5. Remove the bulb by pulling it
straight out of the bulb holder.
6. Install a new bulb.
7. Replace the headlamp cap in
reverse order.
Fog lamps
Have bulbs replaced by a repairer.
Front turn signal lamps
C11E6019A
1. Open the bonnet.
2. Remove the headlamp assembly.
3. Disconnect the wiring harness
connector from the bulb holder.
4. Rotate the front turn signal bulb
holder counterclockwise.
5. Pull the front turn signal bulb
holder out of the lamp housing.
6. Press the bulb inward and rotate
it counterclockwise to remove it
from the bulb holder.
7. Install a new bulb into the
holder by pressing it in and
rotating it clockwise.
8. Install the holder into the lamp
housing by rotating it
clockwise.
9. Reinstall the headlamp
assembly.