Technical data
Vehicle care 323
Removing the spare tyre
2178534
1. Use a flat-blade screwdriver to
pry off the hole cover above the
rear bumper.
2. Use the supplied wheel wrench to
loosen a bolt to fix a spare tyre.
3. Unhook the cable on the tyre
carrier which is located below the
rear bumper.
4. Remove the spare tyre from the
tyre carrier.
Note
To eliminate the possibility of the
jack and tools rattling while the car
is moving, stow them securely
under the floor covering.
Jack specification
Maximum working load : 900 kg
Wheels and tires
Wheels and tires
Tire condition, wheel condition
Drive over edges slowly and at right
angles if possible. Driving over sharp
edges can cause tire and wheel
damage. Do not trap tires on the kerb
when parking.
Regularly check the wheels for
damage. Seek the assistance of a
repairer in the event of damage or
unusual wear.
Winter tires
Winter tires improve driving safety at
temperatures below 7C and should
therefore be fitted on all wheels.
{Warning
We designed the jack for use on
your vehicle only.
Do not use jack provided with your
vehicle on other vehicles.
Never exceed the jack’s maximum
permissible load.
Use of this jack on other vehicles
may damage the other vehicles or
your jack and lead to personal
injury.